707157
77
Zoom out
Zoom in
Previous page
1/88
Next page
8.9. Customize the Select buttons
There are 3 separate banks of Select buttons, which are selected using the Bank tabs:
The Mode menu lets you choose between the 4 modes available for each Select button. Each
mode contains a unique set of parameters:
8.9.1. Select button Off
Disables the Select button. This can be used to prevent accidentally pressing the button
when it is not needed in the User preset.
8.9.2. Select button Switched Control
Option: Choose between Gate and Toggle. Gate activates the button only when
pressed and deactivates it when released; Toggle activates the button when it is
pressed and deactivates it when pressed again.
Channel: Select the MIDI channel output for the selected button, between 1 and
16. This can also be set to “User”, which will make the button output to the MIDI
channel selected for the MIDI Ch button [p.63].
CC Number: The selected button can be set to transmit any MIDI CC# between
0-127. Many MIDI CC numbers are named within the drop-down menu to identify
standard uses.
Off Value: When the button is released it doesn't have to return to a zero value.
Click/drag the knob or enter a value in the field below to set the minimum value
the button will send when it is released.
On Value: Click/drag the knob or enter a value in the field below to set the
maximum value the button will send when it is pressed.
8.9.3. Select button RPN / NRPN
The Select buttons have the option to transmit Registered Parameter Numbers (RPN) or Non-
Registered Parameter Numbers (NRPN). These are numbers that can be used by various
manufacturers to allow their proprietary parameters to be controlled by external devices.
Refer to the documentation of the target instrument to see if it can respond appropriately to
these commands.
Option: Specify whether the button needs to transmit RPN or NRPN data.
Channel: Select the MIDI channel output for the selected button, between 1 to 16.
This can also be set to “User”, which will make the button output the RPN/NRPN
data to the MIDI channel selected for the MIDI Ch button [p.63].
RPN / NRPN LSB: Defines the RPN/NRPN value for Least Significant Byte that the
button will send when activated. Click/drag the knob or enter a value between 0
and 127 in the field below.
RPN / NRPN MSB: Defines the RPN/NRPN value for Most Significant Byte that the
button will send when activated. Click/drag the knob or enter a value between 0
and 127 in the field below.
Select button Bank 2 is active
Arturia - User Manual KeyLab MkII - MIDI Control Center 72
77


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Arturia Keylab MKII 61 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Arturia Keylab MKII 61 in the language / languages: English as an attachment in your email.

The manual is 5,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Arturia Keylab MKII 61

Arturia Keylab MKII 61 User Manual - German - 98 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info