784010
13
Zoom out
Zoom in
Previous page
1/73
Next page
13Get Started
Arlo Go 2 LTE/WiFi Security Camera
User Manual
To view signal strength in the Arlo app aer your camera is set up, tap Settings > My
Devices. Select your camera, and tap Connected To > Cellular Settings > Signal Strength.
Place your camera in an area where it has at least three bars of signal strength. In an area
with low signal strength, your camera’s battery life is much shorter because your camera
spends so much time trying to connect to the network.
Make sure that your Arlo Go 2 is at least 6.5 feet (2 meters) away from any major electrical
equipment, large metal or concrete objects, or other sources of signal interference.
Note: For information about roaming, contact your mobile broadband service provider. Some
service providers do not allow roaming. In cases where roaming is allowed, it comes with
additional charges and oen requires additional services from your service provider.
Mount your Arlo Go 2 Camera
You can mount your Arlo Go 2 Camera on a wall or ceiling. Before you mount your camera,
make sure you’ve found a good location for LTE signal strength and motion detection.
Note: You must follow the instructions in the Arlo app when you rst install your Go 2
Camera. Do not begin mounting your camera before the Arlo app instructs you to during the
installation process.
You need the following items to mount your camera:
A power drill with a 15/64 inch (6 mm) drill bit
A Phillips-head screwdriver
The screw mount that came in the package with your camera
A pencil (optional)
Note: Mount your camera onto a at, supportive surface.
When mounting your camera, select a mounting surface that can support the weight of
your camera with the battery installed. Mounting your camera in an unstable location might
create a hazardous situation or damage your product, which might not be covered by Arlos
warranty.
To mount your Arlo Go 2 Camera:
1. Place the screw mount on the wall or ceiling where you plan to mount your camera.
2. On the wall or ceiling, mark the location of the three holes from the mount.
The marks can be used as a guide to drill pilot holes.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Arlo Go 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Arlo Go 2 in the language / languages: English as an attachment in your email.

The manual is 3.93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Arlo Go 2

Arlo Go 2 User Manual - German - 76 pages

Arlo Go 2 User Manual - Dutch - 74 pages

Arlo Go 2 User Manual - French - 73 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info