702726
5
Zoom out
Zoom in
Previous page
1/12
Next page
Planning
? Copyright 1996 WARNING-Opto-Elektronik GmbH & Co Produktions KG
changes reserved
4
2.4 Extension possibilities
The following options are available for supplementary instalment of a B-board:
?? lens heater for transmitter and receiver
?? B-PC with alarm memory and armed/disarmed control input
?? B-PC with alarm memory, armed/disarmed control input, disqualification
and lens heater for receiver further lens heater for transmitter
2.4.1 Armed/Disarmed
The armed/disarmed control input serves for deleting and/or blocking the Alarm memory. By selecting
armed/disarmed the Alarm memory is blocked. The memory is set as soon as during an armed period a
beam is interrupted.
2.4.2 Alarm memory
The Alarm memory is activated as soon as during an armed period a beam is interrupted (indicated by
red LED on the B-board). For remote display an open collector output towards minus is available.
2.4.3 Disqualification
In case of slow reduction of the IR intensity at the receiver, for instance caused by severe upcoming fog,
snow, dirtying of the lens system or mechanical changes the disqualification evaluation system becomes
activated (indicated by yellow LED on the B-board). For remote display an open collector output towards
minus is available.
The time interval until the release of a disqualification can be adjusted optionally on the B-board between
5 and 30 seconds. During all this time the receiving amplitude of the IR beam must be under a defined
level. If this level is exceeded only for a short instant, the time starts running again. The alarm output
can, as an option, be suppressed during disqualification.
(see 5 putting into operation)
2.5 Heater
To prevent the optical devices from dewing when applied outdoors or in areas exposed to sudden climate
changes, transmitters and receivers must, by all means, be equipped with lens heaters. Those are to be
inserted at the transmitters and receivers between lens and electronic board and must be fixed by a
screw at the housing’s subsoil. Finally a foil is bend carefully around the lens and then clamped between
housing and PC board.
The heaters are controlled thermostatically and run by separate current supply 12 V AC or DC voltage
(see 3.2 wiring of the devices).
For outdoor application with pillars at least one pillar heater per m column above the ground must be
considered.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aritech DO510 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aritech DO510 in the language / languages: English as an attachment in your email.

The manual is 0,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info