557703

Aritech CD15003 Manual

7
Zoom out
Zoom in
Previous page
1/24
Next page
User Manual for CD72/95/15003
Page 7
U
SING A SINGLE ALARM SYSTEM
This chapter
explains how to switch on and off an alarm system for premises with only one alarm
system. These instructions also apply to users who only have access to a single alarm system in the
premises, although several systems may actually be present.
Depending on how the system has been programmed, you may not need to do all the steps shown in
the instructions.
If you enter the wrong code 10 times consecutively, the system is automatically locked for 90 seconds.
During this time you cannot access the system.
A
RMING A SYSTEM
Before you can arm, that is switch on, the alarm system, all intrusion zones must be secure. If a zone
in the premises is ‘open,’ that is its doors, windows, etc. are not properly closed, you will not be able to
set the alarm in that zone, and the message ‘Open zones’ will appear on the display. It will also show
you which zone(s) are open. You must then check that the doors, windows, etc. protected by the
zone(s) shown on the display are properly closed.
1. Go to the keypad. The current date and time appear on
the display. An example is shown.
TUE 23 APR 07.39
2. Press the key
0
and then enter your code. A ‘*’ appears in
the display for every key you press. Use the
0
key to
cancel an incorrect entry and to restart a new entry code.
Enter Code
0 + code
Enter Code ****
Arm Menu
3. Press the
Accept
key.
!
!!
!
Normal Set
4. Press the
Accept
key again.
!
!!
!
If the system cannot be armed because there are area(s)
in the premises which are not properly secured, the
message
‘Open Zone(s)
’ will appear and a list of the
zone(s) not closed. Press the
0
key to quit and check the
doors, windows, etc. of the zone(s) identified.
Normal Set
"
For information about excluding open zones, refer to the
section ‘Arming a system which has open zones’ on page
8.
The alarm is being set.
System Arming
The buzzer begins to beep. You must now exit the
protected area by the designated route.
Leave now
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aritech CD15003 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aritech CD15003 in the language / languages: English as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info