702286
8
Zoom out
Zoom in
Previous page
1/24
Next page
8 ATS7100/7110 Installation and Troubleshooting Guide
2. INSTALLATION
2.1. Mounting the ATS7100/7110 into the control panel
Figure 1. Mounting in an ATS2000/3000/4500 Figure 2. Mounting in an ATS4000
Mounting location
The ATS7200 must be mounted inside an ATS panel
housing.
Important
a. Disconnect AC mains plug from AC mains
wall socket.
OR
b. Disconnect the mains with a dedicated circuit
breaker.
2.2. Mounting the unit
Mounting the ATS7100/7110 into an
ATS2000/3000/4500 control panel
(ref to Figure 1)
1. Place the clips in the square holes (4) (use metal
pillars when available).
2. Mount the ATS7100/7110 using screws.
3. Connect the ATS7100/7110.
Mounting the ATS7100/7110 into an ATS4000
control panel
(ref. to Figure 2)
1. Remove the screws (1) and lift off the control panel
PCB.
2. Place the extension pillars with the plastic rings on
top of the existing pillars (3).
3. Place the clips in the square holes (4).
4. Connect the ATS7100/7110.
5. Mount the ATS7100/7110 using the screws and
extension pillars (5).
6. Place the ATS control panel PCB back into it’s
original position and mount using screws.
Connecting the ATS7100/7110
1. Connect the flat cable () between the control
panel (connector J20) and the dialler (connector
CONN1).
2. Connect the incoming ISDN line from the NT1 into
CONN3.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aritech ATS7100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aritech ATS7100 in the language / languages: English, Dutch as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info