702280
17
Zoom out
Zoom in
Previous page
1/28
Next page
ATS125x 4-Door DGP Installation Manual 13
Power-up procedure
When the installation is complete, ensure that the unit is addressed correctly using
DIP switches 1 to 4. Only addresses 1 to 12 are available.
Verify that the RAM memory in the ATS125x and the Advisor MASTER control panel is
the same.
On initial power-up, the LEDs on the 4-door DGP should indicate as follows:
RST LED: OFF.
ATS system databus indicator LEDs:
Rx1: Flashes if the ATS125x receives polling from the ATS control panel.
Tx1: Off if the ATS125x is not addressed or is not programmed to be polled by the
control panel.
4-door DGP local databus indicator LEDs:
Tx: Flashes when the ATS125x is polling remote devices (readers/interfaces) on the
local databus; TX should always be active.
Rx: Flashing indicates remote devices reply to polling.
Setup procedure
1. The minimal setup only consists of those settings required to activate the DGP
and the connected RASs for programming.
2. Set addresses of RASs (readers or keypads) connected to the local databus of the
4-Door DGP.
3. In the Advisor MASTER control panel, installer programming (menu 19.4): DGP,
activate polling for the 4-Door DGP and set the DGP type.
How to access the ATS125x programming menu
Access to the Door programming menu is via the Advisor MASTER, Installer menu 28,
“To remote devices”. When programming in the 4-door programming menu, you are
actually programming the ATS125x.
If you are denied access to “To remote devices”, it is because one or more of the
above hardware or programming criteria have not been met.
To access the menu:
1. Start with the display showing:
Remote Device: 1-DGP, 2-RAS
Device:
Enter the type of remote device you want to program. Select 1 (DGP).
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aritech ATS1250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aritech ATS1250 in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Aritech ATS1250

Aritech ATS1250 Additional guide - Dutch - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info