702272
7
Zoom out
Zoom in
Previous page
1/32
Next page
ATS1190 Programming Manual 5
2.2. Setting the readers address
The Smart Card Reader is set to RAS address 16 by default. There are two methods to change the address.
1. Use a configuration card programmed with the smart card programmer ATS1620 and the ATS8100
TITAN software package.
2. Use the Smart Card Reader menu.
Method Procedure
1. Change the address by
programming a configuration card
using the TITAN system
management software and the
smart card programmer (ATS
1620).
1. On the TITAN menu bar, select Admin > Card Programmer
> Write reader config. card.
2. In the box labelled Reader Address type the required
reader address (1 to 16 are allowed).
3. Place a configuration card or a blank card on the smart
card programmer and click the “Write” button.
4. Badge this card at the reader and check in menu 19-
Installer programming, and menu 3-RAS Database that the
reader is being polled.
5. Repeat the above steps with a different address for each
reader to be polled on the databus.
Note on programming in TITAN:
For more information on programming the reader
address in TITAN, see the online help page on the “Card
Writer’s Setup” menu screen.
Other options for the reader can be programmed at the
same moment the address is set.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aritech ATS1190 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aritech ATS1190 in the language / languages: English as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Aritech ATS1190

Aritech ATS1190 Installation Guide - English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info