702272
5
Zoom out
Zoom in
Previous page
1/32
Next page
ATS1190 Programming Manual 3
2. CONFIGURING THE SMART CARD READER
There are three ways to configure the Smart Card Reader:
1. Use a configuration card. This requires the smart card programmer (ATS1620) in combination with the
ATS8100 TITAN software package.
2. Through the ATS control panel menu when connected to the system databus.
3. Through the 4-Door DGP menu when connected to the local databus.
2.1. Programming information in the Smart Card Reader
Method Procedure
1. Program a reader configuration
card using TITAN and the ATS1620
smart card programmer to the
required set-up.
See the TITAN help menu for directions.
Connect the reader to the system or local databus or a 12 VDC
supply as described in the Installation Guide and badge the
configuration card once. The reader will beep once. However,
the reader will beep twice if the new set-up differs from the
current set-up.
If the configuration card is badged a second time and the
reader is connected to the system or local databus, the reader
will beep its current address three times.
2. Connect the Smart Card Reader to
the system databus and poll the
reader’s current address.
1. Go to control panel installer menu 3 – Arming Stations.
Select RAS to be Polled. Enter RAS address 16.
2. Go to control panel installer menu 28 – To Remote
Devices.
Press device type 2 (RAS) and enter RAS number 16. The
following text appears:
3. Scroll through the Smart Card Reader’s main menu using
the [ENTER] or [MENU*].
Select the menu options to configure the reader to your
requirements. All the options available on the configuration
card are available in the menu system.
For more detail regarding the reader address, see Setting
the reader’s address.
3. Connect the reader to the local
databus of the 4-Door DGP and poll
the reader’s current address.
1. Control panel installer menu 28 – To Remote Devices
Press device type 1 (DGP) and enter the DGP address of
the 4-Door DGP to which the ATS1190 is connected (the
DGP uses address 1 in this example). The display shows:
Tecom Smart Reader TS0870
0-Exit, Menu:
_
#-Move On *-Move Back
Menu:
_
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aritech ATS1190 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aritech ATS1190 in the language / languages: English as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Aritech ATS1190

Aritech ATS1190 Installation Guide - English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info