719966
20
Zoom out
Zoom in
Previous page
1/28
Next page
20 /
COMMISSIONING
a
b
Checking the gas settings
Supply pressure check
1. Close the gas valve.
2. Loosen screw “b” and insert the pressure gauge
connection pipe into the pipe tap.
3. Open the gas valve.
4. Switch the appliance ON by opening a DHW tap.
The supply pressure should correspond to the value
established in relation to the type of gas for which the
appliance is designed.
5. Switch the appliance OFF by closing the DHW tap.
6. Close the gas valve.
7. When the check is over, tighten screw “b” and make
sure it is securely in place.
8. Open the gas valve and check the tightness of the
screw.
Checking the maximum and minimum pressure
(see the Gas setting table)
1. Close the gas valve.
2. Loosen screw “a” and insert the manometer
connection pipe into the pipe tap.
3. Open the gas valve.
4. Press the On/Off button the display will illuminate.
5. Open one hot water tap.
Simultaneously press the
and (2) buttons for
5 seconds. The display shows26.
6. Press the On/Off, appliance forced to maximum
power. The display shows a number from “00” to “99”.
7. On the manometer verify the pressure and if
necessary press the the
and (2) buttons to
adjust maximum burner pressure as indicated on the
gas settings table.
WARNING!!
Should the power pressure not
correspond to what is indicated on the
Gas Summary Table, DO NOT ACTIVATE
THE DEVICE.
Checking slow ignition power
(see the Gas setting table)
1. Close the gas valve.
2. Loosen screw “a” and insert the manometer
connection pipe into the pipe tap.
3. Open the gas valve.
4. Press the On/Off button the display will illuminate.
5. Disconnect and reconnect the power supply.
6. Press simultaneously press the
or (2) buttons
for 3 seconds. The display showsL6, ppliance
forced to ignition power. Open one hot water tap.
7. On the manometer verify the pressure and if
necessary press the
or (2) buttons to adjust
the slow ignition pressure as indicated on the gas
settings table.
8. Press the ON/FF button to save the change.
9. Close Hot water tap. Switch off the appliance through
ON/OFF button.
10. Close Hot water tap. Switch off the appliance through
ON/OFF button.
11. Tighten the connector screw tightly and check for
leaks using a suitable device
8. Press the On/Off, appliance forced to minimum
power. The display shows a number from “00” to “99”.
9. On the manometer verify the pressure and if
necessary press the the
and (2) buttons to
adjust minimum burner pressure as indicated on the
gas settings table.
10. Press the On/Off button to conrm.
11. Close Hot water tap. Switch off the appliance through
ON/OFF button.
12. Tighten the connector screw tightly and check for
leaks using a suitable device
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ariston Next Evo X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ariston Next Evo X in the language / languages: English as an attachment in your email.

The manual is 2,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info