Manual Ariston Nevis (page 41 of 160) (English, Dutch, French, Italian, Portuguese, Spanish)

663711

Zoom out

Zoom in

1/160

/ 41

1.3 Installing the internal unit

1. Push the piping, together with all cables, through the hole made

in the wall and hook the internal unit onto the top of the tem-

plate.

2. Shape the piping and cables well.

3. Push the lower part of the internal unit well up against the tem-

plate.

Make sure that:

a. The top and bottom hooks on the internal unit are securely fas-

tened onto the template.

b. The unit is fully horizontal.

If the appliance is not level, water may leak from it onto the ﬂ oor.

c. The drain pipe is at the right gradient (minimum of 3 cm for each

metre in length).

d. The drain pipe stays at the bottom of the hole in the wall.

NOTES:

- Do not kink or constrict the internal unit piping in any way.

Avoid bends measuring less than 10 cm in radius.

- Do not bend the same section of the pipe too often as it could

kink after 3 attempts.

- Only remove the closing plugs from the internal unit piping im-

mediately prior to making the connections.

- Keep the condensation drain pipe at the bottom of the hole in

the wall, otherwise it could leak.

N.B.: Drill a hole in the wall that is 5-10 mm lower on the outside

than it is on the inside, so that the slope encourages downward

ﬂ ow of the condensation.

1.4 Installing the external unit

The external unit must be moved and stored in an upright position,

to ensure suitable distribution of the oil in the refrigerant circuit and

prevent damage to the compressor.

Adhere to the procedure as described, and then start connecting

the piping and electrical wiring.

- Install the external unit in a place where the noise made by the

appliance and the expelled hot air cannot be a source of incon-

venience.

- Choose a place that does not obstruct free passage and where

the condensation water produced can easily be ducted to the

outside.

- Do not install the external unit in narrow areas which limit the air

ﬂ ow, or in places exposed to strong winds.

For wall installation:

- install the unit securely onto a solid wall;

- pinpoint the most suitable position on the wall, allowing enough

room for any maintenance work to be carried out easily;

- fasten the brackets to the wall using rawlplugs suitable for the

type of wall in question (take care not to damage any wiring or

piping in conduits);

- use rawlplugs which can support a weight greater than that of

the external unit: during operation the machine vibrates and

should remain installed for years without the screws becoming

loose.

TEMPLATE

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ariston Nevis in the language / languages: English, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 5,69 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ariston Nevis Manual

Product: