579880
20
Zoom out
Zoom in
Previous page
1/88
Next page
20
GB
1.3 Installing the internal unit
1. Push the piping, together with all cables, through the hole
made in the wall and hook the internal unit onto the top of
the template.
2. Shape the piping and cables well.
3. Push the lower part of the internal unit well up against the
template.
Make sure that:
a. The top and bottom hooks on the internal unit are securely
fastened onto the template.
b. The unit is fully horizontal.
If the appliance is not level, water may leak from it onto the
oor.
c. The drain pipe is at the right gradient (minimum of 3 cm
for each metre in length).
d. The drain pipe stays at the bottom of the hole in the wall.
NOTES:
- Do not kink or constrict the piping of the internal unit in any way.
Avoid bends measuring less than 10 cm in radius.
- Do not bend the same section of the pipe too often as it
could kink after 3 attempts.
- Remove the closing plugs from the internal unit piping
only immediately before you make the connections.
- Keep the condensation drain pipe at the bottom of the hole
in the wall, otherwise it could leak.
N.B. Pierce a hole in the wall that is 5-10 mm lower on the
outside than it is on the inside so that the slope encourages
the downfl ow of the condensation.
1.4 Installing the external unit
Keep to the procedure described herein, and then start mak-
ing the connections of the piping and electrical wiring:
- Install the external unit in a place where the noise made by
the appliance and the outlet of hot air cannot be a source
of inconvenience. Choose a place that does not obstruct
the free passage and where the condensation water pro-
duced can easily be ducted to the outside.
Do not install the external unit in narrow places which
limit the air fl ow or in places exposed to strong winds.
In case of wall installation;
- install the unit securely onto a solid wall.
- pinpoint the most suitable position on the wall, allowing
enough room for any maintenance operations to be car-
ried out easily;
- fasten the brackets to the wall using rawlplugs suitable for
the type of wall in question (take care not to damage any
wiring or piping in conduits);
- use more rawlplugs than the appliance weight would re-
quire: during operation, the appliance vibrates and will
have to remain installed for years without the screws ever
becoming loose.
TEM-
PLATE
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ariston MIROS 35 XC4-I at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ariston MIROS 35 XC4-I in the language / languages: English, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info