579880
19
Zoom out
Zoom in
Previous page
1/88
Next page
19
GB
1. INSTALLATION
1.1 Minimum distances
To ensure the appliance is installed correctly, keep to
the minimum distances indicated in fi gure “A” and leave
enough room for air to circulate freely.
Use the accessories provided with the appliance to carry
out the installation properly.
NOTES:
The dimensions of the internal and external units are
given at the back of the manual.
WARNING:
- Make sure the installation site and any systems
to which the device must be connected comply
with the applicable regulations.
- Use manual tools and equipment that are suit-
able for the intended use.
- When lifting loads with a crane or hoist, make
sure the equipment used for lifting is stable and
effi cient and suitably sized for the movement
and weight of the load itself; place the load cor-
rectly in slings, tie ropes around it to limit any
oscillations and lateral movements; lift the load
from a position where there is a full view of all
the space covered by the load during lifting; do
not allow people to pass or stop in the vicinity of
the suspended load.
1.2 Installing the template
NOTES:
Install the internal unit in a place free from all obstacles
(such as curtains) that could hinder the receipt of the
remote control signals and that allows for the air fi lters
to be pulled out without causing any inconvenience.
Install the internal unit in a place where the air fl ow is
not obstructed
WARNING:
Install the template on a solid wall that is not sub-
ject to any vibrations.
1. Using a mason’s level, position the template in such a
way as to ensure it is perfectly on-axis, both vertically
and horizontally.
2. Fasten the template with 6 screws. Be careful not to
pierce or damage any pipes or wiring in conduits (risk
of personal injury from electrocution).
3. Then use the other screws to fasten the template to
the wall uniformly on all its surface.
4. Make a hole in the wall for all piping and electrical
connections to pass through.
300
250
300
600
300
250
150
300
600
600
Fig. “A
ø D
C
A
E
B
ABCDE
2,5 kW 136 41 32,5 70 145
3,5 kW 136 41 32,5 70 145
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ariston MIROS 35 XC4-I at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ariston MIROS 35 XC4-I in the language / languages: English, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info