454563
14
Zoom out
Zoom in
Previous page
1/44
Next page
12
UK
Control panel
Calibrating the control panel
When the plug is inserted (or after a blackout) the
system calibrates the keys; during calibration the
display point flashes. Calibration lasts 15”. The point
stops flashing at the end of calibration.
Off/Stand by: the On condition is obtained by
pressing
for 3 seconds; in this case keys
and
are enabled, the display point and the blue led
of the relative keys light up. The Off condition is
obtained by pressing
again for 3 seconds.
On/Off lights: press to switch on the lights,
which turn amber. Contemporaneously the symbols at
the sides
and turn blue: the intensity of
the light can be increased and diminished with these.
Once the luminosity has been set, pressing
rapidly again memorises it (the symbol turns blue) and
the light
switches off.
On/Off motor: press to switch the motor on.
It turns amber. Contemporaneously the symbols at the
sides
and as well as turn blue.
Press
or to adjust the intensity of
suction. Pressing
again switches the motor off
and the last speed set is memorised.
Intensive timing: by pressing this key the suction
of the hood becomes intensive for a maximum time of 5
minutes. At the end the hood returns to the speed
previously set. To exit from the function earlier press
or one of the following keys: , or
.
Fats filter signal: this symbol (red led) lights up
after 40 hours. Reset the signal by pressing
for a
long time (at least 3 seconds) until the beep confirms
it.
Carbon filter signal action.
This signal is shown only if it has been previously set.
Proceed as follows: press
with the hood in Off:
first
turns red, after about 1 second also
turns red. If you want to eliminate the carbon filter
signal previously set, press
with the hood in Off.
Reset the carbon filter signal (after 160 hours) by
pressing
for a long time (about 3 seconds, until
the beep).
Description of the appliance
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ariston HZV 9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ariston HZV 9 in the language / languages: English, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 9,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info