454689
14
Zoom out
Zoom in
Previous page
1/70
Next page
15
4. Pastry Mode
Position of the C temperature knob: between 50°C and
250°C.
The fan will start and both the top and the bottom heating
elements will come on. This provides a
delicate
cooking
process with a prevalence of heat from the bottom.
This mode is ideal for baking and cooking delicate foods -
especially cakes that need to rise.
5. Grill
Position of the C knob: between 40% and 100%.
The central heating element of the grill will come on. This
incandescent heating element cooks food by means of
thermal radiation directed downwards. The extremely high
and direct temperature of the grill makes it possible to
brown the surface of meats and roasts while locking in
the juices to keep them tender.
6. Double Grill
Position of the C knob: between 40% and 100%.
Both heating elements of the grill will come on. This grill is
larger than other grills and has a completely new design,
which increases the cooking efficiency, thus browning the
entire food surface uniformly.
7. Ventilated Double Grill
Position of the C temeprature knob: between 100°C and
250°C.
Both heating elements of the grill will come on, as well as
the fan. This mode increases the effectiveness of the
unidirectional thermal radiation of the heating elements
through forced circulation of the air throughout the oven.
This helps prevent food from burning on the surface,
allowing the heat to penetrate right into the food.
Oven Light
When the appliance has been switched off, turn the oven
light on by pressing button "1". To turn it off, press the
same button again. The light illuminates the oven and
remains on for the duration of the entire cooking time. If
there is nothing in the oven, it will switch itself off
automatically 10 minutes after the last directions were
entered onto the control panel.
Forced Air Ventilation
In order to reduce the external temperature of the oven,
this appliance has been equipped with a cooling fan which
stays on during the cooking process. A normal flow of air
can be heard exiting between the oven door and the control
panel.
When cooking is over, the fan remains on for a few minutes,
in order to enable the oven to cool down quickly. If there is
a cooktop above the oven, the cooling fan may switch itself
on automatically to protect the electronic components,
even if the appliance has been switched off.
Note: In the event of a power failure, the oven will
memorize the reached cooking stage in such a way that it
can recommence from the very point at which it had
stopped cooking, as soon as the power supply has been
re-established.
Warning
Do not place cookware on the bottom of the oven because
this will result in uneven cooking and the curved surface
of the bottom would not provide a stable support surface.
Programming the cooking mode
B123 C
5
The display panel has a dual purpose: giving the correct
time, and programming the cooking mode.
Cooking programmer
To programme the cooking mode,follow the instructions
below:
select the cooking mode by turning knob "B", and the
temperature by turning knob "C".
select cooking time by pressing button "2". The length
of cooking time will appear on the display panel, and it
can be altered by turning knob "C" until the desired
cooking time comes up. The selected cooking time does
not include the time required for preheating the oven.
select end cooking time by pressing button "3". The
display panel will feature the end cooking time obtained
by adding the current time to the previously selected
cooking time, as well as the time necessary for the
oven to preheat (automatically calculated by the
appliance according to the cooking mode selected).
Turn knob "C" until the display panel features the time
you want the food to be ready.
press button "1" to set the programme.
After these selection procedures, the display panel will
feature the time at which preheating will commence, and
that at which cooking will be over. The latter can be altered
up until the cooking mode and temperature reappear on
the display panel. Any incorrect data can be corrected
simply by repeating the instructions stated above.
To alter any entries after the cooking mode has been
programmed, press button "1" for a few seconds. The data
which was previously entered will appear on the display
panel. This data can be altered by following the instructions
above.
To cancel a cooking mode which has already been
programmed
To cancel any programme which has been entered, turn
knob "B" anticlockwise until the term "OFF" appears on
the display panel.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ariston FD 88 C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ariston FD 88 C in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info