47979

Ariston FD 771 P Manual

26
Zoom out
Zoom in
Previous page
1/42
Next page
26
GB
Cleaning by Pyrolysis
SAFETY MEASURES
During pyrolysis, the temperature inside the oven
reaches 450° to 500°. These high temperatures are
needed for breaking down the residues inside the oven
(see above).
Your oven is therefore equipped with the following
safety devices:
• The door automatically locks as soon as the tem-
perature reaches a certain level in order to prevent any
risk of injury by burning.
• The power for the heating elements cuts off in case
an anomaly occurs.
Comments
1 - Despite the high interior temperature throughout the
pyrolysis operation, the exterior walls of the oven re-
main only slightly warm, due to:
• Reinforced insulation of the cooking chamber,
• A fan which circulates air to cool the walls.
2 - Looking through the oven window, you might see
particles that flare up during their destruction by pyroly-
sis upon contact with a heating element. This is merely
a phenomenon of combustion. It is perfectly nor-
mal and poses no risk.
PRECAUTIONS TO TAKE BEFORE PYROLYSIS
1 - Be sure to eliminate any large spills with a damp
sponge. We strongly advise against the use of deter-
gents or any other oven cleaning products.
2 - Remove all accessories. They are not designed to
resist the high temperatures of pyrolysis. Furthermore,
some of them might obstruct the circulation of heat on
the oven walls, thus harming the performance of the
operation. The accessories can easily be cleaned like
regular dishes, even in a dishwasher.
3 - Do not leave dish towels on the oven handle.
Important:
During pyrolysis, the surfaces may become hot. Keep
young children away.
How to start pyrolysis:
- Remove all accessories from the oven. Eliminate
large spills, in order to avoid any risk of producing
fumes or flames.
- Close the door.
- Set the Function Selector to
- Set the programme. You can choose between:
• Immediate start: same procedure as for a cooking
operation,
• Delayed start: same procedure as for a cooking
operation.
Pyrolysis usually takes about 75 minutes. It can last as
long as 75 to 100 minutes depending on how dirty the
oven is.
What happens during pyrolysis?
The indicator light comes on when pyrolysis starts:
either immediately, or
at the preset time if you have programmed a delayed
start.
The indicator light is off when pyrolysis starts. It
comes on when the temperature inside the oven
reaches a certain level. It is then impossible to open
the door.
What happens at the end of pyrolysis?
The indicator light goes off and stays off,
The indicator light goes off when the temperature
inside the oven has dropped sufficiently. It is then pos-
sible to open the door, with the Function Selector still on
.
Some white dust may remain on the bottom and walls of
the oven. Remove it with a damp sponge after the oven
has cooled completely.
If you wish to use the residual heat to start a cooking
operation, do not worry about the dust—it is harmless.
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ariston FD 771 P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ariston FD 771 P in the language / languages: English, Dutch, French, Spanish as an attachment in your email.

The manual is 0,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info