Manual Ariston E-System One (page 44 of 80) (English)

719961

Zoom out

Zoom in

1/80

44 /

SETTINGS - ADJUSTMENT - PROBLEM IDENTIFICATION MENUS

sub-menu

Parameter

Description value

default setting

4 2 4 Compensation from 0 to 20 20

if setting = 0, the temperature taken from the ambient sensor does not affect the calculation of the setting. If setting = 20,

the temperature taken has maximum inuence on the setting.

4 2 5 Zone 1 heating MAXIMUM temperature

setting

from 35 to 85 °C 82 if parameter 420 = 1

from 20 to 45 °C 45 if parameter 420 = 0

4 2 6 Zone 1 heating MINIMUM temperature

setting

from 35 to 85 °C 35 if parameter 420 = 1

from 20 to 45 °C 25 if parameter 420 = 0

4 3 DIAGNOSTICS

4 3 4 Zone 1 heat request 0 = OFF

1 = ON

5 ZONE 2 PARAMETER

5 0 ZONE 2 TEMPERATURE SETTING

5 0 2 Heating xed temperature setting

“Heating xed temp”

from 35 to 82 °C

(high temperature - para. 420

=1)

70 Activated only with temperature

control and xed temperature

(see 521)

from 20 to 45 °C

(high temperature - para. 420

=0)

5 2 ZONE 2 SETTING

5 2 0 Heating appliance temperature value setting 0 = from 20 to 45°C

(low temper ature)

1 = from 35 to 85°C

(high temperature)

1 select in the appliance type

base

5 2 1 Basic heating control type selection type

depending on the peripheral devices

connected

0 = xed ow temperature

1 = device On/Off

2 = NOT PRESENT

3 = external sensor only

4 = NOT PRESENT

1 To activate heating control,

press the AUTO button. The

display lights up the AUTO

symbol

5 2 2 Slope from 0_2 to 0_8 (low temperature)

from 1_0 to 3_5 1_5 (high temperature)

- see graph on the previous page

If the external sensor is used, the boiler calculates the most suitable heating ow temperature taking the external

temperature and the type of appliance into account.

The type of curve must be chosen according to the type of appliance radiator and the heat losses present in the building.

5 2 3 Parallel curve shift Zone 2 Offset from - 7 to + 7 (low temperature) 0

from - 14 to + 14

(high temperature)

To adapt the thermal curve to the appliance requirements, it is possible to perform a parallel shift of the curve in order

to alter the calculated ow temperature and therefore the ambient temperature.

By accessing this parameter or pressing the buttons 12 the curve can be shifted in a parallel manner as indicated in the

gure shown below.

The value is indicated on the display:

- from -7 to +7

(low temperature)

- from -14 to +14

(high temperature)

Each step represents a ow temperature increase/decrease of 1°C in relation to the

set-point value.

5 2 4 Compensation from 0 to 20 20 if setting = 0, the temperature

taken from the ambient sensor

does not affect the calculation

of the setting. If setting = 20,

the temperature taken has

maximum inuence on the

setting.

5 2 5 Zone 2 heating MAXIMUM temperature

setting

from 35 to 85 °C 82 if parameter 520 = 1

from 20 to 45 °C 45 if parameter 520 = 0

5 2 6 Zone 2 heating MINIMUM temperature

setting

from 35 to 85 °C 35 if parameter 520 = 1

from 20 to 45 °C 25 if parameter 520 = 0

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ariston E-System One in the language / languages: English as an attachment in your email.

The manual is 11,88 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ariston E-System One

Ariston E-System One User Manual - English - 12 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ariston E-System One Manual

Product: