Manual Ariston CP 649 FT (page 28 of 88) (English, German, Dutch, French, Italian, Portuguese)

591455

Zoom out

Zoom in

1/88

ELECTRICAL CONNECTION

Those ovens equipped with a three-pole power supply cable

are designed to operate with an alternating current with the

voltage and frequency indicated on the data plate (located

on the appliance) and in the instruction booklet. The wire

for earthing the appliance is yellow-green in colour.

Fitting on a power supply cable

Opening the terminal board:

• Using a screwdriver, prise on the side tabs of the terminal

board cover;

• Pull open the cover of the terminal board.

To install the cable, proceed as follows:

• Remove the wire clamp screw and the three contact

screws L-N-

• Fasten the wires beneath the screwheads using the fol-

lowing colour scheme: Blue (N) Brown (L) Yellow-

Green

• Secure the supply cable in place with the clamp and

close the cover of the terminal board.

Connecting the supply cable to the mains

Install a standardised plug corresponding to the load

indicated on the data plate. When connecting the cable

directly to the mains, install an omnipolar circuit-breaker

with a minimum contact opening of 3 mm between the

appliance and the mains. The omnipolar circuit breaker

should be sized according to the load and should comply

with current regulations (the earth wire should not be

interrupted by the circuit breaker).

The supply cable must be in such a position that no part of

it can reach a temperature of 50°C above room temperature.

Before connecting to the power supply, make sure that:

• The electrical safety of this appliance can only be guar-

anteed if the cooker is correctly and efficiently earthed,

in compliance with regulations on electrical safety.

Always ensure that the earthing is efficient; if you have

any doubts call in a qualified technician to check the

system. The manufacturer denies all responsibility for

damage resulting from a system which has not been

earthed.

• Before plugging the appliance into the mains, check that

the specifications indicated on the date plate (on the

appliance and/or packaging) correspond to those of the

electrical and gas mains of your home.

• Check that the electrical capacity of the system and

sockets will support the maximum power of the

appliance, as indicated on the data plate. If in doubt,

consult a qualified technical engineer.

• If the socket and appliance plug are not compatible,

have the socket replaced with a suitable model by a

qualified technical engineer. The latter, in particular, will

also have to ensure that the cross section of the socket

cables are suitable for the power absorbed by the

appliance. The use of adapters, multiple sockets and/or

extensions, is not recommended. If their use cannot be

avoided, remember to use only single or multiple

adapters and extensions which comply with current

safety regulations. In these cases, never exceed the

maximum current capacity indicated on the single

adapter or extension and the maximum power indicated

on the multiple adapter. The plug and socket must be

easily accessible.

INSTRUCTIONS FOR THE INSTALLER

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ariston CP 649 FT in the language / languages: English, German, Dutch, French, Italian, Portuguese as an attachment in your email.

The manual is 2,61 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ariston CP 649 FT Manual

Product: