645925
12
Zoom out
Zoom in
Previous page
1/64
Next page
EN
- 10 -
WARNING
Always start the appliance before adding the ice cream or the sorbet to prevent the mix from
freezing immediately inside the container.
- Leave the machine to operate for a maximum of 30-40 minutes, or until the mixture reaches the
required consistency. Ice creams should have the consistency of a soft cream. For thicker ice
cream, remove the mix from the bowl and put it into an airtight freezer container. Leave it in the
freezer just for a short period – no longer than 30 minutes.
WARNING
Never stop and restart the appliance during the freezing process, since the mix may freeze
when coming in contact with the bowl, jeopardizing the movement of the paddle.
- It is possible to add other ingredients (chocolate flakes, nuts, caramel) by pouring them through
the funnels (D) during the last 5 minutes of the freezing process.
- When the mix reaches the required density, switch the appliance off by pressing the apposite
switch (A) and unplug it.
- Remove the motor cover (B) by pulling the appropriate unlocking levers (C) upwards (Fig. 7).
Remove the support (E) by rotating the two levers (I) on the base (H), Fig. 4, and the mixers (F)
in upright position.
- Use an ice cream slice or a plastic spoon to take the ice cream inside the bowls (G).
WARNING
Do not use metal utensils or objects inside the bowl to prevent the surface from being damaged.
HANDY HINTS:
- The higher the percentage of fats in the ice cream, the richer the ice cream will be, as well as softer
and blended.
- Adding a whisked egg white in the final moments of blending will add to the volume of the mix.
- Homemade ice creams should only be stored in airtight containers inside the freezer. In any case,
do not store the ice cream for longer than 2 days.
- The mix must be fluid at the start of preparation. Do not use hard or frozen ingredients inside the
mixture.
- Adding alcohol to a recipe will block or even prevent the freezing process.
CLEANING AND MAINTAINING THE APPLIANCE
IMPORTANT
Clean the freezing bowls (G), the mixers (F) and the support (E) thoroughly before the next
use. Any residues could affect the hygiene conditions that are essential when making ice
cream. Eggs, milk, cream and generally speaking, all fresh foods are easily contaminated
and perishable, which is why maximum cleanliness of parts will guarantee the best results in
terms of hygiene and ice cream safety.
- Wash all components with warm, soapy water.
- Wipe the motor cover (B) with a damp sponge or a cloth.
IMPORTANT
Never use abrasives or metal utensils. Rinse and dry all parts thoroughly.
Do not proceed with freezing process of the bowl when it is still wet.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ariete 631 Twin Ice Cream Maker at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ariete 631 Twin Ice Cream Maker in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info