805027
17
Zoom out
Zoom in
Previous page
1/23
Next page
V 11/21 40
TIMER BUTTON (on both the remote control and portable unit)
Press this button for 1 second to set the timer.
1 Timer-on (automatic switch on)
When the appliance is off, set the time after which you want to turn on the unit. Press the + or - buttons to set the ignition
interval (each press corresponds to 0.5 hours) up to 10 hours. Over 10 hours by pressing the + or - button, each press
corresponds to 1 hour. Press the Timer button to confirm. When the Timer setting is finished, after 5 seconds without
further selections, the display returns to showing the temperature. The Timer Led on the control panel remains illuminated
during the selected time interval.
Remote control: Press the TIMER button. The T-ON and H icons will light up on the remote control. Within 5 seconds,
press the + and - buttons to set the operating time (to scroll the set time more quickly, keep the + and - buttons pressed at
the same time). Press the Timer button again to confirm the set time. The T-ON icon remains on and indicates that the
ignition TIMER is set.
2Timer-off (automatic switch-off)
When the appliance is turned on, set the time after which you want to turn off the unit. Press the + or - buttons to set the
ignition interval (each press corresponds to 0.5 hours) up to 10 hours. Over 10 hours by pressing the + or - button, each
press corresponds to 1 hour. Press the Timer button to confirm. When the timer setting is finished, after 5 seconds without
further selections, the display returns to showing the temperature. The Timer Led on the control panel remains illuminated
during the selected time interval.
Remote control: Press the TIMER button. The T-OFF and H icons will light up. Within 5 seconds, press the + and - buttons
to set the operating time. Press the TIMER button to confirm the setting. The T-OFF icon remains on and indicates that the
shutdown TIMER is on.
Canceling the timer: If TIMER is set, press TIMER to view the set timer. Press TIMER again to cancel the set TIMER.
To speed up the time selection interval, hold down the + or - buttons for two seconds
X-FAN BUTTON (only on remote control)
In cooling and dehumidification mode it is possible to activate the X-FAN function.
After pressing the X-FAN button on the remote control, with the unit off, the unit's internal fan continues to operate for a
short time at minimum speed, to allow any residual water in the air pipe to dry. If you want to stop this function, press the
X-FAN button on the remote control again
TEMPERATURE AND ERROR DISPLAY
With the exception of message H8, tank full, when an error occurs do not try to repair the air conditioner, always take it to
an Argoclima Service Center, otherwise the guarantee will no longer be valid.
Problem Cause Solution
H8 Tank full of water. Empty the tank.
If the problem persists, contact a service centre.
F1, F2, F4, F0 Contact a service centre.
H3, E8
The room temperature exceeds the appliance's operating
range (beyond 35°) or there is too much humidity. Wait for
the temperature to drop below 35 °C.
Check if the evaporator and compressor are obstructed by
objects. If they are, remove the objects, disconnect the unit
then restore the power supply.
Clear the obstructed ventilation grilles.
If the problem persists, contact a service centre.
The temperature and error display lights up only in the COOL mode. In the DRY and FAN modes the display does not light
up.
SAFETY FUNCTIONS
REMOTE CONTROL LOCK
Simultaneously press "+" and "-" to lock the remote control.
The "Lock" icon will light up on the remote control, and the latter will not respond to commands.
SWITCHING BETWEEN °C AND °F.
Press the "-" and "MODE" buttons simultaneously to switch between °C and °F.
LIGHT FUNCTION
Press the “+” and “FAN” buttons simultaneously for 3 seconds to set the activation/ deactivation of the lamp.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argo Zori at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argo Zori in the language / languages: English as an attachment in your email.

The manual is 1.65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Argo Zori

Argo Zori User Manual - German - 24 pages

Argo Zori User Manual - French - 23 pages

Argo Zori User Manual - Italian - 23 pages

Argo Zori User Manual - Spanish - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info