805027
16
Zoom out
Zoom in
Previous page
1/23
Next page
V 11/21
39
ON/OFF BUTTON
Press this button to switch the unit on or off. When switched on, the device will emit an audible signal and will begin to
operate according to the latest settings (Memory function).
MODE SELECTION BUTTON (MODE)
(on remote control and on the unit)
Press this button to select the various operating modes, according to the following sequence: Cool -> Dry -> Fan
The LEDs on the control panel will light up according to the selected mode.
In COOL mode the display lights up and the set temperature is shown (from 16 ° C to 30 ° C). In DRY and FAN modes
the display does not light up.
Remote control: Press Mode button to select the desired operation mode
In Cool mode, the temperature can be adjusted by pressing + or - buttons.
In Dry mode, the air conditioner operates in low fan speed.
In Fan mode, the fan speed can be adjusted by pressing FAN button
FAN SPEED ADJUSTMENT BUTTON
(on remote control and on the unit)
Press this button when the appliance is on to adjust the fan speed, on the control panel press the FAN button, the LED
indicators will light up at the selected speed in the following sequence: low (Low), medium (Med), high (High), automatic
(auto):
On the remote control, however, the fan speed selection sequence will be as follows:
The fan speed cannot be adjusted in DRY mode and is fixed at low.
+ - ADJUSTMENT BUTTONS
(on remote control and on the unit)
These buttons can be used to adjust the temperature and set the Timer.
The temperature can be adjusted to between 16 °C and 30 °C.
Increase temperature+):
1) Allows for adjusting the desired temperature in cooling (COOL) mode.
2) Whenever the
+
) button is pressed, the set temperature increases by 1 °C.
Decrease temperature (
-
):
1) Allows for adjusting the desired temperature in cooling (COOL) mode.
2) Whenever the (
- )
button is pressed, the set temperature decreases by 1 °C.
In dry mode, adjustments cannot be made with these buttons.
The same button allows you to set the TIMER.
By holding down the + or - button for 2 seconds on the remote control, you can quickly set the temperature.
SLEEP BUTTON
(on remote control and on the unit)
Press this button to activate the Sleep function, which automatically adapts the temperature to changes in body and room
temperature throughout the night, so as to optimise comfort when sleeping and minimise consumption.
In cooling mode, the temperature increases by 1 °C in an hour then by 2 °C in two hours, and remains in this setting for the
whole period. The Sleep function is not available in the ventilation, dehumidification and auto modes. The indicator light turns
on display whenever the Sleep function is set the LED on the display lights up, while the Sleep symbol is active on the remote
control.
The Sleep function cannot be activated in Dry (dehumidification) and Fan (ventilation) modes.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argo Zori at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argo Zori in the language / languages: English as an attachment in your email.

The manual is 1.65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Argo Zori

Argo Zori User Manual - German - 24 pages

Argo Zori User Manual - French - 23 pages

Argo Zori User Manual - Italian - 23 pages

Argo Zori User Manual - Spanish - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info