689099
10
Zoom out
Zoom in
Previous page
1/32
Next page
V 03/17
42
Pressing this button will allow you to cycle through and set the fan speed: automatic (AUTO),
low (
), medium ( ) or high ( ).
N.B.:
When you select AUTO, the unit will automatically select the most suitable fan speed according
to the factory settings.
The fan will operate at low speed in dry mode.
6. SWING button
Press this button to set the swing angle (up/down). You can cycle through and set the fan's
angle of airflow as shown below:
nessuna
visualizzazione
(il deflettore orizzontale si arresta
nella posizione corrente)
nessunavisualizzazione(ildeflettoreorizzontalesiarrestanella
posizionecorrente)
nodisplay(thehorizontalflapstopsinthecurrentposition)
When you select , the air conditioner will operate the fan automatically. The horizontal flap
will automatically tilt up and down to the maximum angle.
When you select
, the air conditioner will operate the fan in a fixed position.
The horizontal flap will stop in a fixed position.
When you select
, the air conditioner will operate the fan at a fixed angle. The
horizontal flap will deliver air at a fixed angle.
Hold and press the
button for 2 seconds to set the desired tilt angle. Release the button
once you have reached the desired angle.
N.B.:
may not be available. When the air conditioner receives this signal, the fan will
start operating in automatic mode.
7. I FEEL button
Press this button to start the I FEEL function. The icon will appear on the remote control
display. When you select this function, the remote control will send the detected ambient
temperature to the indoor unit, which will then adjust its operation automatically based on the
difference between the detected temperature and the set temperature.
Press the button again to exit the I FEEL function. The
icon will disappear from the display.
The remote control should be positioned near the user when this function is selected.
The remote control should not be placed anywhere high or low temperatures may occur
to avoid inaccurate ambient temperature detection.
8. HEALTH/AIR button
Press this button once to start the air purification function. The icon will appear on the
display. Press the button a second time to start the purification and sanitisation function
simultaneously. The
and icons will appear on the display.
Press the button a third time to turn off both functions.
Press the button a fourth time to start the sanitisation function. The
icon will appear on the
display.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argo X3MI 80 SH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argo X3MI 80 SH in the language / languages: English as an attachment in your email.

The manual is 3,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info