805096
12
Zoom out
Zoom in
Previous page
1/60
Next page
72
ON/OFF button
Press the ON/OFF button to turn the air conditioner on or off. When you turn on the air conditioner, the power
indicator on the indoor unit's display will illuminate (green). The colour varies for different models. The indoor
unit will emit a beep.
MODE button
Press this button to select the desired operating mode.
When you select automatic mode, the air conditioner will operate automatically according to the factory settings.
The set temperature cannot be adjusted and will not be displayed. Pressing the "FAN" button will allow you to
adjust the fan speed. Pressing the "SWING" button will allow you to adjust the angle of airflow.
When you select cool mode, the air conditioner will run in cool mode. The indicator will illuminate on the
display. Press "" or "" to adjust the set temperature. Press the "FAN" button to adjust the fan speed. Pressing
the "SWING" button will allow you to adjust the angle of airflow.
When you select dry mode, the air conditioner will run at low speed in dry mode. The indicator will illuminate
on the display. The fan speed cannot be adjusted in this mode. Pressing the "SWING" button will allow you to
adjust the angle of airflow.
When you select fan mode, the air conditioner will operate only the fan, blowing air without cooling or heating.
All the indicators will switch off. Press the "FAN" button to adjust the fan speed. Pressing the "SWING" button
will allow you to adjust the angle of airflow.
When you select heat mode, the air conditioner will run in heat mode. The indicator will illuminate on the
display. Press "" or "" to adjust the set temperature. Press the "FAN" button to adjust the fan speed. Pressing
the "SWING" button will allow you to adjust the angle of airflow.
N.B.:
To prevent blasts of cold air from being blown into the room, there will be a delay of 1 5 minutes after selecting
heat mode before operation begins. (The actual delay will depend on the indoor ambient temperature).
The temperature can be set between 16 30°C and four fan speeds are available: automatic, low, medium and
high.
FAN button
Pressing this button will allow you to cycle through and set the fan speed: automatic (AUTO), Low ( ), Low-
medium( ) Medium ( ), Medium-high (), High ( ).
N.B.:
The fan speed in dehumidification mode is low.
Pressing the ventilation speed button for 2 seconds in Cooling or Dehumidification mode activates the X-FAN
function and the icon appears on the remote control: the unit will continue to ventilate for a few minutes, even
after switching off the unit, to dry the battery of the indoor unit, thus preventing the formation of mold. This
function is not available in Auto, Ventilation or Heating mode.
If the X-FAN function has been selected: after turning off the unit with the ON / OFF button, the indoor unit fan
will continue to run for a few minutes at low speed. During this time, press the FAN key for 2 seconds to stop
the fan.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argo X3i Eco Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argo X3i Eco Plus in the language / languages: English as an attachment in your email.

The manual is 3.74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Argo X3i Eco Plus

Argo X3i Eco Plus User Manual - German - 63 pages

Argo X3i Eco Plus User Manual - French - 63 pages

Argo X3i Eco Plus User Manual - Italian - 60 pages

Argo X3i Eco Plus User Manual - Spanish - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info