805096
14
Zoom out
Zoom in
Previous page
1/60
Next page
74
N.B.:
may not be available. When the air conditioner receives this signal, the fan will start operating in
automatic mode.
SLEEP button
By pressing this button you can select Sleep 1 , Sleep 2 , Sleep 3 and cancel the Sleep function.
- SLEEP 1 works in cooling and dehumidification mode: after one hour of unit operation, the temperature will
increase by 1°C, after 2 hours it will increase by 2°C; in heating mode, after one hour of unit operation, the
temperature will decrease by 1°C and after two hours will decrease by 2°C.
- SLEEP 2 the air conditioning operates on the basis of pre-set temperature curves.
In cooling mode:
1. When the initial temperature is set to 16°C-23°C, after activating the Sleep function, the temperature will
increase by 1°C every hour, after three hours the temperature will stabilize, after 7 hours the temperature will
decrease by 1°C and the unit will start working constantly.
2. When the initial temperature is set to 24°C-27°C, after activating the Sleep function, the temperature will
increase by 1°C every hour, after two hours the temperature will stabilize, after 7 hours the temperature will
decrease by 1°C and the unit will start working constantly.
In heating mode:
1. When the initial temperature is set to 17°C-20°C, after activating the Sleep function, the temperature will
decrease by 1°C every hour, after one hour the temperature will decrease and the unit will maintain this constant
temperature.
2. When the initial temperature is set to 21°C-27°C, after activating the Sleep function, the temperature will
decrease by 1°C every hour, after two hours the temperature will decrease and the unit will maintain this
constant temperature.
3. When the initial temperature is set to 28°C-30°C, after activating the Sleep function, the temperature will
decrease by 1°C every hour, after three hours the temperature will decrease and the unit will maintain this
constant temperature.
- SLEEP 3: it is possible to customize the sleep curve: in this mode, keep the "TURBO" key pressed for a long
time to access the setting of the CUSTOM SLEEP function.
1. The remote control timer display shows "1 hr" and the set temperature indication "88" displays the
corresponding temperature of the last set sleep curve and flashes (the first data item is linked to the initial values
of the curve set in factory).
2. Press "" and "" to adjust the corresponding temperature. After adjustment, press the "TURBO" key to
confirm.
3. At this point, the time of the timer on the remote control increases automatically in steps of 1 (ie "2 hr" or "3
hr" ... or "8 hr"). The set temperature indication "88" displays the corresponding temperature of the last set
sleep curve and flashes.
4. Repeat steps (2) and (3) until the temperature setting is complete for 8 hours; at this point the sleep curve is
set correctly. When this operation is completed, the remote control resumes displaying the time of the initial
timer and the temperature displayed is the one initially set.
I FEEL function
Press this button to start the I FEEL function. The icon will appear on the remote control display. When you
select this function, the remote control will send the detected ambient temperature to the indoor unit, which will
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argo X3i Eco Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argo X3i Eco Plus in the language / languages: English as an attachment in your email.

The manual is 3.74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Argo X3i Eco Plus

Argo X3i Eco Plus User Manual - German - 63 pages

Argo X3i Eco Plus User Manual - French - 63 pages

Argo X3i Eco Plus User Manual - Italian - 60 pages

Argo X3i Eco Plus User Manual - Spanish - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info