665464
11
Zoom out
Zoom in
Previous page
1/30
Next page
V 11/15
41
• If no adjustment is made for 5 seconds the remote control will exit the setting mode. This also
applies to the TIMER ON/OFF function.
12. TIMER ON / TIMER OFF button
SETTING TIMER ON
This function allows you to program the air conditioner to turn on. When you press this button, the
icon will disappear from the display and the word "ON" will flash on the remote control display.
Press "" or "" to adjust the TIMER ON setting.
Press and hold "" or "" for 2 seconds to rapidly change the time until you reach the desired
value. Press TIMER ON to confirm. The word "ON" will stop flashing. The
icon will re-appear
on the display.
CANCELLING TIMER ON
If the TIMER ON function is enabled, press the TIMER ON button to cancel the setting.
SETTING TIMER OFF
This function allows you to program the air conditioner to turn off. When you press this button, the
icon will disappear from the display and the word "OFF" will flash on the remote control
display. Press "" or "" to adjust the TIMER OFF setting. Press and hold "" or "" for 2
seconds to rapidly change the time until you reach the desired value. Press "TIMER OFF". The
word "OFF" will stop flashing. The
icon will re-appear on the display.
CANCELLING TIMER OFF
If the TIMER OFF function is enabled, press the TIMER OFF button to cancel the setting.
N.B.:
• You can set the TIMER ON and TIMER OFF function in ON and OFF mode.
• Before you set the TIMER ON or TIMER OFF function, set the clock.
• When the TIMER ON or TIMER OFF function is enabled, the air conditioner will turn on or off
according to the set time. Turning the air conditioner ON/OFF will not affect the setting.
Getting to know the button combination functions
Energy saving function
In cool mode, press the TEMP and CLOCK buttons simultaneously to start or stop the energy
saving function. When you start the energy saving function, "SE" will appear on the remote
control display and the air conditioner will automatically adjust the set temperature according to
the factory settings to achieve the best energy-saving effect. Press TEMP and CLOCK again
simultaneously to exit the energy saving function.
N.B.:
• When the energy saving function is enabled, the fan will operate at the default automatic speed
and cannot be adjusted.
• When the energy saving function is enabled, the set temperature cannot be adjusted. The
remote control will not send a signal to the unit when the TURBO button is pressed.
The SLEEP and energy saving functions cannot operate simultaneously. If the energy saving
function was set in cool mode, press the SLEEP button to cancel it. If the SLEEP function was
set in cool mode, start the energy saving function to cancel it.
8°C heating function
In cool mode, press the TEMP and CLOCK buttons simultaneously to start or stop the 8°C
heating function. When this function is enabled,
and 8°C will appear on the remote control
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argo Wall Dual 12000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argo Wall Dual 12000 in the language / languages: English as an attachment in your email.

The manual is 2,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Argo Wall Dual 12000

Argo Wall Dual 12000 User Manual - German - 34 pages

Argo Wall Dual 12000 User Manual - French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info