724565
9
Zoom out
Zoom in
Previous page
1/15
Next page
9
EN
A) HOW TO SET THE ON TIME
1. Press the ST button once.
The ON and time indications flash.
2. Press the H button until the designed
hour is displayed.
Press the M button until the designed
minutes are displayed. The display
will change automatically back to
show the present time after 10 sec.
3. Press the ON/OFF button to start the
air conditioner.
4. Press the button to activate the
ON timer.
B) HOW TO SET THE OFF TIME
1. Press the ST button twice.
The OFF and time indications flash.
2. Press the H button until the designed
hour is displayed.
Press the M button until the designed
minutes are displayed. The display will
change automatically back to show
the present time after 10 sec.
3. Press the ON/OFF button to start the
air conditioner.
4. Press the button two times to
activate the OFF timer.
C) HOW TO SET A PROGRAM FOR
DAILY ON/OFF OPERATION (OR
VICEVERSA)
1. Set the timer ON/OFF as shown in A)
and B).
2. Press the ON/OFF button to start the
air conditioner.
3. Press three times the button to
activate the DAILY timer.
SETTING THE TIMER
After timer setting, press ST button in order to check the
ON/OFF setting time.
NOTE
C
4
2
2
3
1
HIGH POWER MODE
You can select High Power only during cooling mode and
not during dehumidifying (dry) and fan mode. High Power
mode allows to obtain the maximum air conditioner’s
efficiency. The user can choose to activate the High
Power mode, using the remote control unit, after having
selected cooling mode. Under these conditions the air
conditioner will reach its maximum thermal power and
consequently also the maximum electrical consumption
and noise. On the contrary, if you want to obtain the best
performance in efficiency and silentness, High Power
mode is not recommended: let the air conditioner run in
normal condition (factory default program).
To activate High Power mode it is necessary (after having
selected the cooling mode) to press the HIGH POWER
button : the symbol switches on; at this point
the operation lamp (green lamp on the front panel of the
air conditioner) begins blinking slowly, indicating that High
Power mode is activated; press the button again to release
the function: therefore the green lamp will stop blinking
and it will be switched on permanently.
NOTES
During the high power operation the room temperature
could not correspond to the set temperature.
HIGH POWER program remains set also if you switch
OFF and ON again the air conditioner.
TIMER SETTING PROCEDURE.
Press four times the button.The 1
HOUR TIMER mark will appear on the
display.
CANCELLATION PROCEDURE
Press the ON/OFF button to turn the air conditioner off.
Wait for the indoor unit to stop operating.
Press the ON/OFF button again to turn the air conditioner
on.
SETTING THE 1 HOUR TIMER
This function causes the unit to operate for one hour at the
set conditions, regardless of whether the unit is on or off.
9


Need help? Post your question in this forum.

Forumrules
1

Forum

argo-ulisse-eco

Reset search

  • How do I turn on the air conditioner when the blue light is on the timing button? Submitted on 7-7-2023 at 18:59

    Reply Report abuse
  • How to turn on the air conditioning when the blue light is on the timing button Submitted on 7-7-2023 at 18:57

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argo ULISSE ECO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argo ULISSE ECO in the language / languages: English as an attachment in your email.

The manual is 1,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Argo ULISSE ECO

Argo ULISSE ECO User Manual - German - 15 pages

Argo ULISSE ECO User Manual - French - 15 pages

Argo ULISSE ECO User Manual - Italian - 16 pages

Argo ULISSE ECO User Manual - Portuguese - 16 pages

Argo ULISSE ECO User Manual - Spanish - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info