724565
8
Zoom out
Zoom in
Previous page
1/15
Next page
8
EN
ADJUSTING THE FAN SPEED
HOW TO SET THE PRESENT TIME
COOLING / AUTOMATIC
DEHUMIDIFYING (DRY)
2.
Press the SET H button until the present time hour is
displayed.
Press the SET M button until the present time minutes
are displayed. The display will automatically stop
flashing.
1. Press the button SEL TYPE three times.
The time indication alone flashes.
FAN ONLY
Verify that the unit is connected to the
main power and the STANDBY lamp is
light up.
1. Set the selector to COOL (symbol
on the display).
2. Press the +/- buttons (temperature
selection) to set the desired temperature
(the temperature range is between 32 °C
max. and 10 °C min.).
THE DISPLAY SHOWS THE
SELECTED TEMPERATURE.
AFTER 5 SECONDS FROM THE
REQUIRED TEMPERATURE SETTING
THE DISPLAY WILL SHOW THE ROOM
TEMPERATURE AGAIN.
3. Press the FAN button to select the fan speed.
C
1
3
2
2
1
1. Set the button to DRY. The icon is displayed.
2. Press the
+/- buttons (temperature selection)
to set the
desired temperature (the temperature range is between
32 °C max. and 10 °C min.).
THE DISPLAY SHOWS THE
SELECTED TEMPERATURE.
AFTER 5 SECONDS FROM THE
REQUIRED TEMPERATURE SETTING
THE DISPLAY WILL SHOW THE ROOM
TEMPERATURE AGAIN.
Use DRY operation when you want to reduce the humidity
in the room.
Once the room temperature reaches the set level, the unit
repeats the cycle of turning on and off automatically.
During DRY operation, the fan speed is automatically
set (Remote control lamp is ON) to prevent
overcooling.
Dry operation is not possible if the indoor temperature is
10 °C or less.
NOTE
If you want to make air circulate without any temperature
control, press button until only the fan symbol
appears on the display.
AUTOMATIC
Simply set the FAN selector to the position.A
microcomputer automatically controls the fan speed when
the AUTO mode is selected. When the air conditioner
starts operating, the fan speed varies (high - medium -
low - very low) according to the thermal load of the room.
The automatic speed is not available in FAN ONLY mode.
NOTE
MANUAL
If you want to manually adjust speed just set the FAN
selector as desired.
High speed Med. speed Low speed
NIGHT MODE / ENERGY SAVING
This mode enables you to save energy.
1. Set the selector to cool or dry.
2. Press the button.
3. The mark appears on the display. Press the
button again to release the function.
What does the NIGHT mode mean?
When you select the NIGHT mode, the air conditioner will
modify automatically the set temperature after 60 minutes:
it will be raised by 1°C.
This enables you to save energy without sacrificing your
comfort.
During the NIGHT mode the internal fan speed is
automatically lowered and reduces the noise.
NOTE
NOTES
If the fan is set in automatic mode and the unit stops
because setpoint is reached, also the fan will stop.
If the fan is set in one of the three manual speeds
(high-medium-low) it will go on operating at the
selected speed even if the unit stops due to reaching
the setpoint.
When the external or internal temperature is low, the
unit could limit the speed of the compressor or switch
it off for a certain period of time to avoid the formation
of ice on the internal heat exchanger.
8


Need help? Post your question in this forum.

Forumrules
1

Forum

argo-ulisse-eco

Reset search

  • How do I turn on the air conditioner when the blue light is on the timing button? Submitted on 7-7-2023 at 18:59

    Reply Report abuse
  • How to turn on the air conditioning when the blue light is on the timing button Submitted on 7-7-2023 at 18:57

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argo ULISSE ECO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argo ULISSE ECO in the language / languages: English as an attachment in your email.

The manual is 1,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Argo ULISSE ECO

Argo ULISSE ECO User Manual - German - 15 pages

Argo ULISSE ECO User Manual - French - 15 pages

Argo ULISSE ECO User Manual - Italian - 16 pages

Argo ULISSE ECO User Manual - Portuguese - 16 pages

Argo ULISSE ECO User Manual - Spanish - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info