805067
14
Zoom out
Zoom in
Previous page
1/21
Next page
36V 05/23
By remote controller:
On the remote controller, when this function is activated, the icon remains lit on the remote controller display.
To activate the On timer, press the button twice, 01 will be shown on the remote controller display. It is
therefore possible, with the UP/DOWN buttons, to set the appliance on time up to 24 hours. When the set
time ashes on the display for 5 seconds, it indicates that the setting has been made correctly.
To activate the Off Timer, press the button twice, the remote controller display will show the time remaining
before switching off.
To cancel the Timer function, hold down the button for about 3 seconds and the icon on the display will turn off.
6. SWING BUTTON
When the unit is on, press this button on the control panel or on the remote controller to select the horizontal
automatic swing of the air discharge louvers, the LED lights up on the control panel. Press this button again to
stop the swinging of the aps, which will then remain xed in the same position. The LED on the control panel will
turn off. It is possible to manually adjust the vertical aps by directing them to the desired position.
7. CHILD LOCK BUTTON
When the unit is on, on the control panel, press this button for 3 seconds to activate or deactivate the control
panel lock function.
The LED on the control panel lights up.
To deactivate this function, press this button again for 3 seconds or switch off.
On the remote controller, press this button to turn this function on or off.
Instead, "Lo" will appear on the remote controller display.
FUNCTIONS THAT CAN ONLY BE ACTIVATED BY REMOTE CONTROLLER
SLEEP FUNCTION
Press this button on the remote controller for 3 seconds to activate the Sleep function, the lighting of the control
panel dicreases. To deactivate this function, press and hold the Speed button again for 3 seconds, or press the
Mode button or the POWER button.
In Auto mode it is possible to adjust the fan speed.
In Cooling mode it is possible to adjust the temperature and the fan speed
No adjustments can be made in Dry mode
In Ventilation mode, only the ventilation speed can be adjusted
The Sleep function allows the unit to operate silently, saving energy, and the appliance will operate at low fan
speed.
In Sleep mode there is no variation of the fan speed. In Cooling mode, after the rst hour the set temperature
increases by 1°C, after the second hour it increases again by 1°C; after the fth hour it decreases by 1C°,
continuing in this way for another 3 hours, then it exits the Sleep function and resumes normal operation in Cooling.
TEMPERATURE DISPLAY FUNCTION
On the remote controller, press the UP/DOWN buttons simultaneously to change the temperature display from
C° to F°.
MEMORY FUNCTION
In the event of a blackout, when restarted the unit operates in the same mode previously set.
DISPLAY LIGHTING
Press the Display button on the remote control to turn the remote controller display light on or off.
TEMPERATURE DISPLAY AND ERRORS
The temperature set in cooling mode will appear on the display, while if the unit operates in dehumidication
mode, the room temperature will appear on the display.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argo Nikko at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argo Nikko in the language / languages: English as an attachment in your email.

The manual is 10.21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Argo Nikko

Argo Nikko User Manual - German - 22 pages

Argo Nikko User Manual - French - 22 pages

Argo Nikko User Manual - Italian - 22 pages

Argo Nikko User Manual - Spanish - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info