805067
13
Zoom out
Zoom in
Previous page
1/21
Next page
35V 05/23
FUNCTION OF THE BUTTONS ON THE REMOTE CONTROLLER AND ON THE CONTROL PANEL
(the numbers below refer to the control panel drawing)
When the cable is connected to the power supply, the unit emits three beeps.
Press this button to turn the unit on or off. The unit beeps. All the LEDs of the buttons light up on the control panel,
and then turn off after a few seconds, while the LED of the POWER button remains on, but with a reduced intensity
of brightness.
When the unit is switched on, the ambient temperature is shown, and the unit enters Stand-by mode.
1. POWER BUTTON
Press this button on the control panel or remote controller to turn the unit on or off. The unit beeps.
When the unit is switched on, the temperature previously set in Cooling mode (Cool) is shown. Press this button
again to start the appliance operation.
The default settings are: Cooling mode, low fan speed.
2. SPEED BUTTON
Press this button on the control panel to select the desired fan speed from Low, High, Auto, in the following circular
sequence:
The corresponding LEDs light up on the control panel according to your selection.
The Auto fan speed can be selected only in the Cooling and Ventilation modes.
3. MODE BUTTON
Press this button on the control panel to select the operating mode among: Automatic (AUTO), Cooling (Cool),
Dehumidication (Dry), Ventilation (Fan) in the following circular sequence:
The corresponding LEDs on the display light up on the control panel according to the selection made. The LED ring
located on the front of the appliance changes color according to the selected operating mode:
- Cooling (Cool): blue
- Dehumidication (Dry): white
- Ventilation (Fan): Green
- In the Dehumidication (DRY) operating mode, it is not possible to select the fan speed.
On the remote controller, press the Mode button to select the operating mode in the following circular sequence:
Cooling (Cool), Dehumidication (Dry), Ventilation (Fan), Automatic (AUTO).
It is also possible to directly select the desired operating mode by pressing the COLD (cooling), AUTO (automatic),
DRY (dehumidication). To set FAN mode (ventilation), press MODE button, the icon lights up and Fn appears on
remote controller display..
The corresponding icons light up on the remote controller display according to the selection made.
4. UP/DOWN BUTTONS
Press these buttons on the control panel or on the remote controller to adjust the temperature (each time you press
the temperature increases or decreases by 1°C) and set the Timer (each time you press the time increases or
decreases by 1 hour).
5. TIMER BUTTON
By control panel:
When the air conditioner is off, press “TIMER” to set a time to turn on the unit. Press “UP” or “DOWN“ to set
the hour, and press “TIMER” again to conrm.
When the air conditioner is on, press “TIMER” to set a time to turn off the unit. Press “UP” or “DOWN“ to set
the hour, and press “TIMER” again to conrm.
To set the switch-off or switch-on time of the appliance, press the Timer button, “00” will ash on the display for
three seconds, with the UP/DOWN buttons it is possible to select the desired time. Timer time selection range is
0-24 hours. Then press the Timer button to conrm the chosen time.
To cancel the Timer function, press and hold the button for about 3 seconds.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argo Nikko at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argo Nikko in the language / languages: English as an attachment in your email.

The manual is 10.21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Argo Nikko

Argo Nikko User Manual - German - 22 pages

Argo Nikko User Manual - French - 22 pages

Argo Nikko User Manual - Italian - 22 pages

Argo Nikko User Manual - Spanish - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info