665482
13
Zoom out
Zoom in
Previous page
1/29
Next page
13
EG
HOW TO ACCESS THE WIRING CONNECTIONS
Remove the front panel in the same way of the bottom part (there are no screw to be removed and no wire to be
disconnected).
After you removed the front panel you will see the tank.
In the bottom right part, you will see the cover of electrical connections.
THE FRONT PANEL AND THE COVER OF ELECTRICAL CONNECTIONS MUST BE FASTENED SECURELY DURING
OPERATION OF THE UNIT.
General
• The acceptable voltage variation is: ± 10% during operation.
• The electrical connection conduits must be fixed.
• Class 1 unit.
Power supply and signal cables connection
Emix Tank must always be connected to the electrical power supply in a separate manner compared to the connection
of the outdoor unit, using only the bipolar shielded cable as all the other indoor units.
The power supply must come from an isolation and electric protection device (not supplied) in accordance with existing
regulations.
The installation must be protected by a double-pole circuit-breaker (not included).
ELECTRICAL CONNECTIONS
HOW TO REMOVE THE COVER OF ELECTRICAL CONNECTIONS
Unscrew the fixing screw.
Pull the cover and remove it.
NOTE
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argo Emix at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argo Emix in the language / languages: English as an attachment in your email.

The manual is 1,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Argo Emix

Argo Emix User Manual - English, German - 30 pages

Argo Emix User Manual - German - 29 pages

Argo Emix User Manual - French - 30 pages

Argo Emix User Manual - French - 29 pages

Argo Emix User Manual - Italian, Portuguese, Swedish, Spanish, Finnish - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info