665483
5
Zoom out
Zoom in
Previous page
1/30
Next page
EG
5
RATING DATA
Power supply 230 V – 50 Hz
Minimum power input 4 W/0,05 A
Max power input without any electrical heater 100 W/0,66 A
Max power input with electrical heaters 3x1500 W
Water connection 3/4” G – 3/4” G
Refrigerant connection (R410A) 3/8” – 3/8”
Net weight 16,5 Kg
Dimensions (H/W/D) 272x527x285 mm
Deoxidized annealed copper tube for refrigerant tubing connecting the units of the system, it has to be insulated with
foamed polyethylene (min. thickness 8mm). See paragraph “REFRIGERANT CIRCUIT” for dimensions.
Anti-freeze oil for flare connections (about 30g.).
Electric wire: use insulated copper wires of size and length as shown at paragraph “ELECTRICAL CONNECTIONS”.
Tubes for water (MINIMUM DIAMETER BETWEEN EMIX AND TANK: 20mm).
•If the water hardness exceeds the value of 20 ° F (1 ° F = 10mg of calcium carbonate per liter of water) the installation
of a polyphosphate treatment system responding to current regulations (DPR 59/09 UNI 8065) is required.
•You must install a non-return valve, in accordance with standard IEC61770, on the cold water pipe before the junction
between Emix and the accumulation system (check hydraulic diagrams).
In addition to this, It is warmly suggested:
•inlet and outlet service valves for Emix
•a pressure reducing valve
•other non-return valves
•a ow switch to be placed on the hot water draw to optimise the operation of the unit (see INSTALLATION INSTRUC-
TIONS - SECTION F).
Check hydraulic diagrams for all additional required material.
ADDITIONAL MATERIAL REQUIRED FOR INSTALLATION (NOT SUPPLIED)
1. Standard screwdriver
2. Phillips head screwdriver
3. Knife or wire stripper
4. Tape measure
5. Level
6. Sabre saw or key hole saw
7. Hacksaw
8. Core bits ø 5
9. Teflon or hemp
10. Hammer
11. Drill
12. Tube cutter
13. Tube flaring tool
14. Torque wrench
15. Adjustable wrench
16. Reamer (for reburring)
17. Hex. key
Tools required for installation (not supplied)
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argo Emix Tank at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argo Emix Tank in the language / languages: English, German, French, Italian, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 4,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Argo Emix Tank

Argo Emix Tank User Manual - English - 29 pages

Argo Emix Tank User Manual - German - 29 pages

Argo Emix Tank User Manual - French - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info