724569

Argo ECOLIGHT MULTI SPLIT Manual

11
Zoom out
Zoom in
Previous page
1/43
Next page
V 10/19
53
The remote control should be positioned near the user when this function is selected. The
remote control should not be placed anywhere high or low temperatures may occur to avoid
inaccurate ambient temperature detection.
10. TIMER ON/OFF button
On a working unit, press this button to set the unit's power off time. When the unit is off, press this
button to set the unit's power-up time. By pressing this button, the HOUR ON or HOUR OFF
indicator starts blinking: if you press "▲" or "▼" buttons you can set the time (from 0.5 to 24) to
switch the unit off or on. Hold down the button "▲" or "▼" for 2 seconds to quickly change the time
until the desired time is reached. Press the TIMER button to confirm the TIMER settings and the
HOUR ON or HOUR OFF indication will stop blinking.
If the “HOUR” message flashes but does not follow any setting, it will stop flashing after 5 seconds.
If the TIMER ON or OFF function is activated, press the TIMER button to cancel the setting.
11. Wi-Fi button
Press this button to start the Wi-Fi function. When the Wi-Fi function is active, the "Wi-Fi" icon will
appear on the remote control display. When the remote control is off, press and hold the "Mode"
button and the "Wi-Fi" button simultaneously for 1 sec to return to the factory settings.
12. LIGHT button
Press this button to turn off the indoor unit's display light. The icon will disappear from the
remote control display.
Press this button again to turn on the display light. The icon will appear on the display.
Getting to know the button combination functions
Energy saving function
In cool mode, press the TEMP and CLOCK buttons simultaneously to start or stop the energy
saving function. When you start the energy saving function, "SE" will appear on the remote control
display and the air conditioner will automatically adjust the set temperature according to the factory
settings to achieve the best energy-saving effect. Press TEMP and CLOCK again simultaneously
to exit the energy saving function.
N.B.:
• When the energy saving function is enabled, the fan will operate at the default automatic speed
and cannot be adjusted.
• When the energy saving function is enabled, the set temperature cannot be adjusted. The remote
control will not send a signal to the unit when the TURBO button is pressed.
• The SLEEP and energy saving functions cannot operate simultaneously. If the energy saving
function was set in cool mode, press the SLEEP button to cancel it. If the SLEEP function was
set in cool mode, start the energy saving function to cancel it.
8°C heating function
In cool mode, press the TEMP and CLOCK buttons simultaneously to start or stop the 8°C heating
function. When this function is enabled, and 8°C will appear on the remote control display and
the air conditioner will continue to operate at 8°C. Press TEMP and CLOCK again simultaneously
to exit the 8°C heating function.
N.B.:
• When the 8°C heating function is enabled, the fan will operate at the default automatic speed and
cannot be adjusted. The remote control will not send a signal to the unit when the TURBO button
is pressed.
The SLEEP and 8°C heating functions cannot operate simultaneously. If the 8°C heating function
was set in cool mode, pressing the SLEEP button will cancel it. If the SLEEP function was set in
cool mode, starting the 8°C heating function will cancel it.
• When the temperature display is in °F, the remote control will show that the unit is operating at
46°F.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argo ECOLIGHT MULTI SPLIT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argo ECOLIGHT MULTI SPLIT in the language / languages: English as an attachment in your email.

The manual is 4,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info