801835
26
Zoom out
Zoom in
Previous page
1/80
Next page
26
The ice boxes provided increase the cool e󰀨ect: before use, ll them
with water and put in the refrigerator until they are completely frozen.
After that insert the frozen ice boxes in the water tank making sure that
water level is under maximum level allowed.
To deactivate this function press again cooler button. If the evaporative
cooling function is deactivated the unit work as a fan.
HEATER button (E):
Press Heater button to turn on the unit in heating mode and select the
desired power level: minimum (indicator light 2) or maximum (indicator
light 3).
TEMPERATURE button (F):
Press Temperature button (in heating mode) to select the desired
ambient temperature: 20°C (indicator light 7), 25°C (indicator light 8)
or 30°C (indicator light 9).
ATTENTION
»Temperature button (F) can be pressed only in heating mode.
»Desired temperature have to be setted every time you change heating
power level (E button).
»If the setted temperature is lower than ambient temperature, the unit
enter in stand-by mode and it will turn on automatically when the
ambiente temperature will be lower than setted temperature.
Maintenance GB
Before carrying out routine cleaning, switch o󰀨 the fan and disconnect
mains power. For external cleaning use a soft and dry cloth.
DO NOT dip the device in water, or splash it with any other liquids.
DO NOT use solvents or any other chemical products for cleaning it.
When you do not use it, after cleaning it, store the fan in a dry place.
DAILY CLEANING
To reduce bacteria and scale residues, empty the water tank every day
after use and dry it with a soft and clean cloth.
Cleaning the anti-dust lter, cleaning the cooling pad:
Remove it from the appliance by pulling it out. Clean it with water and
replace on the appliance when dry. Fix the anti-dust lter with its screw.
Attention: the cooling pad and the anti-dust lter must be replaced in the
appliance before turn it on.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ardes ARCF02 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ardes ARCF02 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1.75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info