Manual Ardes AR4A20 (page 8 of 27) (English, German, French, Italian, Spanish)

801723

Zoom out

Zoom in

1/27

8 / 27

Note – the filter must be removed and cleaned after each use.

2. Install the fabric filter (16) on top of the HEPA filter, making sure that it covers it

completely.

Note – the filter must be removed and cleaned after each use.

3. Place the cover (4) on the container (10) and close the locking clip (9).

4. “SUCTION” FUNCTION: connect the flexible metal hose (6) to the suction connection

(5)

“BLOW” FUNCTION: connect the flexible metal hose (6) to the blow connection (17).

Note - insert the hose fitting in the guides on the relative connection (5 or 17) and turn it

clockwise to lock it in place.

5. “SUCTION” FUNCTION: Make sure that the material to be sucked up has cooled down.

Note – be careful because it may be cool on the outside but still hot on the inside and,

when it comes in contact with the air, it may become incandescent again.

6. Position the aluminium pipe (7) near the material to be sucked up or blown.

7. Make sure that the switch (2) is set to “0”, then insert the plug in the power outlet.

8. Turn on the unit by turning the switch (2) to position “I”.

9. “SUCTION” FUNCTION: Suck up the ash using the aluminium pipe (7).

NOTE: if the suction power decreases during use, perform the following operations: with

the unit on, press the dusk shaking button 5 times (8) with the aluminium pipe (7), waiting

2-3 seconds before pressing each time (see figure 3 at the end of the booklet).

If the suction power does not improve, it is necessary to switch the unit off, disconnect

it from the power supply and clean the filters (see MAINTENANCE).

“BLOW” FUNCTION: direct the aluminium pipe (7) towards the material to be blown.

10. After use, turn the unit off by turning the switch (2) to position “0”.

11. Remove the plug from the power outlet.

12. Remove the flexible hose by turning the fitting counter-clockwise. Empty out the

container (10), clean the filters (14 + 16) and the hoses (6 + 7) as indicated in the

“Maintenance” paragraph.

MAINTENANCE

NOTE: it is advisable to carry out the cleaning operations outdoors

Disconnect the plug from the power outlet before performing any cleaning and

maintenance operation.

Disconnect the hose (6) by turning it counter-clockwise, open the locking clip (9), remove

the cover (4) and remove the filters (14-16).

- Empty out the container (10) and, if necessary, wash it with water.

- Empty out the hoses (6-7) and, if necessary, wash them with water.

- Clean the filters (14-16):

o after each use, shake the filters and remove any dust residues using a brush;

o after several uses, if the suction power seems to have reduced, wash the filters

with cold water only, then let them dry completely (24h for HEPA filter) before

putting it back in place (do not use dryers or other means).

Note: washing in water gradually deteriorates the filters. If, after washing the

filters, the suction power still seems reduced, replace the filters.

Reassemble the parts on the unit only when completely dry.

- To clean the unit externally, use a soft and slightly damp cloth.

Do not use overly wet substances, liquids or cloths, because any infiltration could

damage the unit irreparably.

Do not use alcohol or chemicals to clean the unit and the filters.

NEVER SOAK THE UNIT IN WATER.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ardes AR4A20 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1.16 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ardes AR4A20 Manual

Product: