801723

Ardes AR4A20 Manual

7
Zoom out
Zoom in
Previous page
1/27
Next page
7 / 27
Disconnect the unit from the power supply during
cleaning operations.
ATTENTION : read this booklet carefully it contains important instructions for a safe
installation, use and maintenance.
Important instructions to be kept for future reference.
Keep handy the guarantee, receipt of payment and these instructions for future use and
reference.
After removing the packaging, check the appliance for any signs of damage.
In case of visible damage, do not use it and contact a qualified technician.
Do not leave parts of the packaging within the reach of children.This appliance is not a
children’s toy: it is an electrical device and must be treated with the necessary caution.
Before connecting the appliance, make sure that the power supply voltage matches the
indication on the data plate.
If the plug and socket are not compatible, the socket has to be replaced with a suitable type
by skilled persons.
Do not use adapters or extension cables which do not meet current safety standards or that
exceed the current carrying capacity limits.
When you don’t use the appliance disconnect it from the power supply and assure that the
interruptor is off.
Do not tug on the power cable or on the appliance itself to remove the plug from the socket.
The use of any electrical appliance requires that a number of basic rulesare observed,
namely:
- Never touch the appliance with wet or humid hands.
- Do not use the appliance when barefoot.
- Do not leave the appliance exposed to weathering (rain, sunlight).
- Do not subject it to rough handling.
The appliance has been designed and manufactured to operate in the home as ASH
VACUUM CLEANER. Any other use is considered inappropriate and dangerous.
Do not use the appliance out of doors.
In case of a breakdown or malfunctioning of the appliance, disconnect it at once.
Do not attempt to repair it, but take it to a service centre approved by the manufacturer.
If you decide you do not want to use this appliance any longer, disable it by cutting the power
cable - of course, after disconnecting it from the socket.
The power cable should be extended to its full lenght to avoid over heating.
For safety reasons, the appliance should never be opened.
Place the appliance on a fiat surface during use.
USER INSTRUCTIONS
(see figure at the end of the booklet)
1 - Handle
2 – Switch
3 – Top cover
4 – Container cover
5 – Connection for SUCTION function
6 – Flexible metal hose
7 – Rigid aluminium pipe
8 – Dust shaking button
9 – Locking clip
10 – Container
11 – Filter presence switch
12 – Motor base
13 – Motor ventilation grid
14 – Washable HEPA filter
15 – screw for HEPA filter
16 – Fireproof fabric filter
17 – Connection for BLOW function
1. Install the HEPA filter (14) on the motor base (12) and secure it well with the fixing screw
(15). The plastic part of the filter must press against the filter presence switch (11),
otherwise the unit will not work (figure 2 at the end of the booklet).
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ardes AR4A20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ardes AR4A20 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1.16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info