765011
88
Zoom out
Zoom in
Previous page
1/124
Next page
• Screw the Spa Boy Housing Plug provided with your spa into the front of the Spa Boy Sensor Housing. This
will seal the water that is in the Housing and prevent the water in the Housing from draining when you drain
your spas water.
Warning: The Spa Boy Sensor must never be permitted to freeze and must always remain in contact with
water. If the Sensor freezes or is not left in contact with water at all times the sensor will fail and will require
replacement! Such failures are not covered by warranty.
What do we do when winterizing a Spa?
• You can now drain your spas water.
• Clean the Spa shell with a mixture of water and white vinegar. Rinse the shell down with fresh water and then
polish the shell with Arctic Pure, Reection.
• When relling your spa with water, leave the Spa Boy Sensor Plug secured in place until the water line is
higher than the Spa Boy Housing.
• The Spa Boy Housing Plug can now be unscrewed from the Housing and the Housing Grate can be screwed
back into the Housing.
• Once the water level has been reached the bottom of the pillow line you can turn the breaker back on to re-
power your spa.
Question 4 Does adding salt to the spas water impact pH? Yes adding salt to the spas water will increase
the pH level. The chlorine that is produced by a salt chlorinator plays a role in the water chemistry of a salt spa.
Salt is sodium chloride. When an electric charge is passed through salt water, the sodium chloride is turned
into sodium hypochlorite. This is the same kind of chlorine that is sold by the gallon as liquid chlorine. The most
important feature of sodium hypochlorite is a high pH. When the salt chlorinator produces chlorine, it raises the
pH of the spas water. Strive to achieve a Low pH level 7.2. pH must not exceed 7.6.
Question 5 What do I do if my ORP Reading is below the Optimum Range? If Spa Boy reects that the
ORP is below the Optimum Range of 545 – 550 mV you must rst consider that water chemistry may have
been a󰀨ected by recent bather load and spa usage, at times the ORP value will overshoot or undershoot the
Optimum Range. If the Spa Boy Dashboard on My Arctic Spa reects that the ORP is below 545 mV do the fol-
lowing:
Check Spa Boy Dashboard through My Arctic Spa to see if the Dashboard reects sanitizing YES, if yes Spa
Boy is currently producing sanitizer. Re-check ORP in a few hours to conrm ORP is increasing.
If Dashboard reects Sanitizing NO: Trip the spas breaker to isolate the power to the spa and then turn the
breaker back on to repower the spa. Check Spa Boy Dashboard through My Arctic Spa to see if the Dashboard
reects sanitizing YES, if yes Spa Boy is currently producing sanitizer. Re-check ORP in a few hours to conrm
ORP is increasing.
If Dashboard reects Sanitizing NO: First, try pressing the Spa Boy BOOST button on the Arctic Spas App or
myarcticspa.com dashboard under “Settings/Spa Boy Status” to manually activate the Spa Boy system for 30
minutes.
Understanding Spa Boy®
Owners Manual - Spa Boy®
8888
88


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Arctic Spas Mustang at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Arctic Spas Mustang in the language / languages: English as an attachment in your email.

The manual is 5,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info