Manual Arcam SoloSub (page 8 of 60) (English, German, Dutch, French, Italian, Spanish)

578740

Zoom out

Zoom in

1/60

E-11E-10

English

troubleshooting

Here are some simple checks you can do if

you are experiencing problems with your

Solo sub.

Power

< Check that the power cord is plugged in

and connected properly.

< Make sure the power and mains

switches are turned on.

Sound

< If wirelessly connected, make sure the

input selector is set to WIRELESS and

the unit is paired with the Solo bar.

< If connected by cable, make sure the

cables are connected properly and the

corresponding input is selected (LINE

or LFE).

< Make sure the volume settings are not

set too low.

Continual improvement policy

Arcam has a policy of continual

improvement for its products. is

means that designs and specications

are subject to change without notice.

specications

Note that all specification values are typical, unless otherwise stated.

System design One-way speaker with 10 litres internal volume. The cabinet is solidly constructed from

machined MDF with internal bracing.

Drive unit 10” (254mm) subwoofer drive unit with long excursion, magnetically shielded.

Frequency range 20Hz to 250Hz.

Impedance 4Ω nominal.

Sensitivity 85dB/watt measured at 1m.

Crossover Fourth order Linkwitz-Riley crossover circuit, 24dB/octave (80dB/decade), adjustable for

frequency and Q.

Wireless connections Proprietary 2.4GHz wireless connection to a Solo bar

Wired connections RIGHT and LEFT/LFE inputs: RCA phono sockets (Gold), max 2.5V, >22Ω.

Mains supply 110-120V / 220-240V at 50/60Hz.

Amplifier 300 watts/4Ω, under normal operating conditions, 380W max.

Finish Dark grey paint.

Dimensions (W x D x H) 320mm x 320mm x 435mm

Weight (Packed) 14kg (Note: take care when lifting the unit).

E&OE

NOTE: All specification values are typical unless otherwise stated.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Arcam SoloSub in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 6,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Arcam SoloSub Manual

Product: