578739
13
Zoom out
Zoom in
Previous page
1/115
Next page
E-21E-20
English
HDMI Setup HDMI Audio Out
Disable g Passthrough
Use the and buttons to switch HDMI Passthrough on
and off. HDMI passthrough passes the video and audio signal
from any HD source to your Solo bar via an HDMI cable.
The Solo bar splits the signal, playing the audio from the HD
source through its own speakers and sending the unaltered
video signal to a TV using an HDMI OUT cable. Press to
go back a level or to exit setup.
CEC / ARC
Enable g Disable
Use the and buttons to switch CEC/ARC on or off.
See page16 for more information. Press to go back a level or
to exit setup.
HDMI setup menu
Default settings are shown in Blue.
rmware update
Download an update file
To perform a rmware update, you’ll need
to download an update le from the Arcam
web site.
Check the availablity of rmware updates by
typing www.arcam.co.uk into your browser
and navigating to the Solo bar page.
Note: Make sure you download the file to the
root of your USB, do not put it inside a folder
or the update will fail.
Performing the update
Make sure the soundbar is turned on at the
plug and in standby mode.
Press and hold the and buttons
simultaneously for about ve seconds.
e Solo bar will turn on and display the
following information:
ARCAM SB M:V024
B:40526 D:30304
Note: M = Main software version,
B=Bluetooth software version and
D = DSP software version.
Press the button to go to the soware
update screen.
e display will change to:
System Update
Insert USB...
Note: Pressing IN- again will cycle between
this and the software version screen.
Insert the USB drive containing the update
le into the UPGRADE socket on the rear
panel of the Solo bar.
e rmware update will
start automatically once
the USB drive has been
detected and the display
will change accordingly:
System Update
Updating...
If 30 seconds have elapsed before the USB
was inserted, the display will timeout and
change to:
System Update
USB Not Detected
is message will be displayed for about
three seconds, aer which the Solo bar will
turn itself o and the entire procedure will
need to be repeated.
If the update was successful, the display will
show the following information for about
three seconds, aer which the Solo bar will
turn itself o.
System Update
Complete
If the update was not successful, the display
will show the following information for
about three seconds, aer which the
Solo bar will turn itself o and the whole
procedure will need to be performed again.
System Update
Error
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Arcam SoloBar at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Arcam SoloBar in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 68,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info