578739

Arcam SoloBar Manual

12
Zoom out
Zoom in
Previous page
1/115
Next page
E-19E-18
English
system setup
System setup menu
Default settings are shown in Blue.
Use the remote control and follow these steps to ensure
your Solo bar is set up for maximum enjoyment.
System Setup Lipsync Delay 0 to 200ms Delays may be introduced into the video signal by video
processing which causes a mismatch between the audio and
video timing. You will notice this by speech sound being out
of synch with lip movements. To compensate for this, you can
adjust the lip sync delay. Use the and buttons to adjust
synchronisation between sound and vision. Press to go
back a level or to exit setup.
Display Level
Dim g Bright g Off
The LED display levels can be adjusted to suit your
requirements. Use the and buttons to switch between
settings. When set to Off, the display illuminates briefly
whenever it receives a command. Press to go back a level or
to exit setup.
App Control
Enable g Disable
Enables the Solo bar to be woken from standby using the
optional remote control app. Use the and buttons to
switch app control on or off. Press to go back a level or
to exit setup.
IR Repeater
Enable g Disable
Use the and buttons to switch IR repeater on or off.
See page16 for more information. Press to go back a level or
to exit setup.
System Info Press OK to view the system software version.
Factory Defaults
Press OK to reset the Solo bar to factory defualts. Note: Paired or connected devices will be lost.
Press to go back a level or to exit setup.
Speaker/EQ Setup Auto Setup Auto setup configures your Solo bar for optimum listening experience Press OK to start setup
procedure. See page17 for more information.
Room EQ
Enable g Disable
Use the and buttons to switch EQ on or off.
Note: Only available after Auto setup has been completed.
Press to go back a level or to exit setup.
Sub Pairing
Press to start pairing procedure. See page10 for more information.
Subwoofer Level 0 to -12dB
Use the and buttons to select a subwoofer level.
Note: Only available after Sub Pairing has been completed.
Press to go back a level or to exit setup.
Headphone out
BT Transmitter
Enable g Disable
Use the and buttons to switch Bluetooth® transmitter
on or off. Press to go back a level or to exit setup.
Device search
Note: Only available if headphone out is enabled.
Press to start searching for headphones. Use and
buttons to select headphone from list. Press to go back a
level or to exit setup.
Speaker/EQ setup menu
Default settings are shown in Blue.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Arcam SoloBar at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Arcam SoloBar in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 68,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info