578809

Arcam rCube Manual

10
Zoom out
Zoom in
Previous page
1/108
Next page
QuickTour
E-10
Remote
Remote
e Remote contains buttons like those found on the Top Panel
for standby, selecting sources and changing the rCube volume.
In addition it can also be used to navigate through menus and
tracks on the iPod and change the iPod play mode (to ‘shue’ for
example).
Power and Standby
e remote standby button 2 works in conjunction with the
rear panel power rocker switch. When the rear panel switch is
in the on position pressing the remote power button will toggle
the unit between fully on (blue LED (mains power) or purple
LED (battery power) on the front of the unit) and standby mode
(red LED on the front of the unit). e remote standby button
duplicates the unit’s top panel standby button.
Changing the Volume and Muting
e remote volume buttons duplicate the top panel volume
and buttons. A short press of + or - will increase or decrease
the rCube’s volume a small amount (there are 52 volume steps)
or you can press and hold these buttons to ramp the volume
up or down. e top panel volume + and - LEDs will ash to
conrm volume adjustment. Pressing the mute button will put
the unit into ‘Mute’. When muted, both volume LEDs (- & +) are
illuminated and no sound will come from the device. Press Mute
again to release the Mute function and allow it to play.
iPod Charging
e rCube, like the ARCAM irDock, has user control over iPod
charging for longer battery life and better sound quality. By
default, the rCube always charges iPods when mains or battery
power is available and the rCube is switched on. iPod charging
is not available in Standby mode. You can manually prevent
charging by pressing the
button. When this button is pressed,
the charge indicator will disappear from the iPod screen and iPod
charging will cease until the button is pressed again, the iPod is
re-inserted or until the rCube is switched back on.
e remote must be pointed
toward the front of the rCube in
order to work.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Arcam rCube at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Arcam rCube in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 15,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info