578809
9
Zoom out
Zoom in
Previous page
1/108
Next page
SOURCE
Chooses local source to play: AUX-in
(red illumination) or iPod (green).
WIRELESS
Chooses available wireless sources to
play: searching (red) or locked (green).
STANDBY
Turn rCube from standby (red LED)
to on (blue/purple) or place unit into
standby.
VOLUME
DOWN
Reduces volume. Press and hold to
smoothly reduce the volume.
VOLUME
UP
Increase volume. Press and hold to
smoothly increase volume.
QuickTour
E-9
Top Panel
PROGRAMME
NAVIGATE
SOURCE
VOLUME
iPod
Aux
?
>
? >
? >
e Top Panel contains touch-sensitive buttons for
standby, selecting sources, and changing the volume. Each
button has an LED above it which illuminates to indicate
each button press.
Power and Standby
At the centre of the top-panel is the standby button.
When the rear-panel rocker switch is on, the 2 button
on the top-panel (or on the remote) toggles between fully
on (blue front LED, or purple when using battery power) and standby
mode (red LED).
Source Selection
You can switch between listening to the iPod dock or AUX rear
panel sources by pressing the SOURCE button (see table below). To
select a wireless source instead, press the WIRELESS button. is
will de-select any AUX or iPod source and start playing from
the optional USB or iPod Transmitter. When a wireless source is
selected, the wireless indicator will glow continuously.
Indicator LEDs
e top panel LEDs illuminate to indicate source selection and volume
adjustment. When using the remote control, the power LED ashes to
conrm reception of remote commands.
Changing the Volume and Muting
A short press of - or + will increase or
decrease the rCubes volume a small
amount or you can press and hold
the button to ramp the volume up or
down. Pressing both volume buttons
simultaneously will instantly mute all
sound coming from the device. Both
volume LEDs (- & +) are illuminated
when the rCube is muted. Press any
volume button to release the Mute
function.
In order to use the wireless transmitter
you must rst set it up. See the section
Setting up the rWave Optional USB
transmitteron page E-18 or “Setting up the
rWand Optional iPod transmitter” on
page E-20
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Arcam rCube at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Arcam rCube in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 15,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info