578801
11
Zoom out
Zoom in
Previous page
1/16
Next page
11
Installation: P35 power ampli er
CONNECTING TO OTHER EQUIPMENT
Follow the installation instructions for the integrated amplifier on
pages 46.
AUDIO IN Connect this input to the output sockets of your pre-
amplifier or the PRE OUT sockets of an integrated amplifier.
MONO LINK The power amplifier can be adapted to provide two
mono loudspeaker outputs from a single input. Pull out the link
supplied and use it to connect the
L and R AUDIO OUT sockets
together. Using one power amplifier per loudspeaker will enable you
to bi-amplify bi-wireable loudspeakers.
This is particularly beneficial for top quality stereo installations with a
separate pre-amplifier, or where amplifiers are provided for the left,
centre and right channel loudspeakers in a five speaker Dolby Pro
Logic or Dolby Digital system.
Contact your Arcam dealer for more information.
Daisy chaining The power amplifier can be connected to further
power amplifiers to drive more speakers (e.g. those in other rooms or
tri-amplified speakers, etc).
Connect the extra power amplifier inputs to the AUDIO OUT sockets
on the power amplifier, left to left, right to right.
REMOTE SWITCHING
By making a connection from the REMOTE IN socket of the P35 power
amplifier to the
TRIG OUT socket of the A32 integrated amplifier, you
can use the A32 to switch the power amplifier on and off. If configured
in this way, the front panel
POWER button of the A32 (or the POWER/
STANDBY
button on the remote control) switches both amplifiers on
and off together. This facility allows you to conceal the power amplifier
yet still control it.
The connecting cable required is a 3.5mm to 3.5mm jack lead (stereo
or mono) and it is possible to connect several power amplifiers to an
A32 by daisy chaining from TRIG OUT of one P35 into the REMOTE IN
of the next.
THREE CHANNEL OPTION
The power amplifier can be upgraded from stereo to three channels
by adding a Third Channel Module: in this case, the model is designated
P35/3.
The module offers extra loudspeaker terminals together with a third
set of AUDIO IN and OUT phono sockets and converts the P35 into
a 3 x 90W (RMS per channel into 8) amplifier suitable for Home
Cinema or multi-channel audio use.
Contact your Arcam dealer for further details.
+ R/CH1
CTR/CH3
SP1
SP2
POWER INLET
OUTIN
L
R
VOLTAGE
SELECT
230V
4 16 OHMS
+
L/CH2
+
R/CH1
+
L/CH2
AUDIO
SP1
SP2
4 16 OHMS
+
CTR/CH3
+
CTR/CH3
AUDIO
IN
OUT
LINK
REMOTE
IN
TRIG
OUT
Optional Third Channel Module
provides a third 90W channel
suitable for Home Cinema or
multi-channel audio use.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Arcam FMJ P35 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Arcam FMJ P35 in the language / languages: English as an attachment in your email.

The manual is 0,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info