138744
8
Zoom out
Zoom in
Previous page
1/26
Next page
DV139
E-8





 




  
  













CR100 Universal remote control
The CR100 remote control is a multi-function unit that controls the
DV139 and up to seven other devices. The instructions on this page
only refer to the control of the Arcam DV139.
For information on using the remote control for other devices, and
a full list of features, see the instruction booklet supplied with the
CR100.
Device selection
IMPORTANT: Press the ‘DVD’ button rst to
operate the DV139.
On/Stand-by
This allows the DV139 to be put into and taken out
of stand-by remotely.
Navigation buttons
Arrow buttons allow navigation around the Basic
and Advanced Set-up menus on the DV139.
Conrm a selection by pressing OK.
SHIFT
B
to Power on
SHIFT
C
to Power off
Numeric keys
Gives direct access to individual tracks on audio
CDs.
VOLUME +/–
Adjusts the sound output.
MODE
This button brings up a menu similar to the ‘Audio’
page of the Set-up menu and allows the Dolby
Pro Logic II settings to be changed while a disc
is being played. Cycles through available audio
surround modes.
SHIFT + MODE cycles through HDMI settings.
DISP (display)
Press to cycle through the front panel display’s
brightness options (dim to bright, off).
0
/
Press and release to skip backwards to the
previous track(
0
) or forwards to the next track
(
/
).
RPT
Cycles through repeat play options (chapter, title,
disc, etc.).
Press SHIFT + RPT to repeat a specic section of a
DVD or VCD (an ‘A-B repeat’).
MENU
Activates the DVD menu if available.
RND
Toggles random (‘shufe’) play of chapters/tracks
on and off.
Source selection and handset conguration
DVD
DVD input/DVD controls
SAT
Satellite decoder input/SAT controls
AV
Television (sound) input/AV controls
TUN
Radio tuner input/TUN controls
AMP
Arcam amplier
AUx
Auxillary (line) input/AUX controls
VCR
Video Cassette Recorder input/VCR
controls
CD
CD player input/CD controls
Press the relevant button once to select input and
recongure the handset.
Press and hold the button until the power LED
blinks once if you wish to recongure the handset
without changing the input.
Advanced controls
These buttons are described on the next page.
MUTE
Press once to mute an Arcam amplier. Press
again (or use +/– volume) to un-mute.
If the remote control receiver
(located on the right of the front-
panel window) is not ‘visible’ to the
remote control hand-set, then the
remote control will not work! Either
locate the unit differently, or take
advantage of the remote control
input on the rear of the player
(consult your dealer for further
information on this option).
Remember to install
the four AAA batteries
supplied before trying to
use your remote control.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Arcam dv 139 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Arcam dv 139 in the language / languages: English as an attachment in your email.

The manual is 1,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info