138742
16
Zoom out
Zoom in
Previous page
1/26
Next page
DV137
E-16
Audio set-up
This section allows you to congure the analogue, digital and HDMI audio outputs. In
particular, the digital output type needs to be set correctly if you are using an external
audio decoder, receiver or D-A converter.
Digital audio output
This setting congures the digital audio output – coaxial, optical and HDMI.
S/PDIF
stereo PCM
When the ‘Stereo PCM’ digital output is selected, all audio material played is
down-mixed to stereo and output as stereo PCM. Use this setting if you have an
external D-A converter that supports only 2-channel PCM.
S/PDIF
bitstream
The Bitstream setting supports the following audio standards:
<
2 channel PCM (on CDs or DVDs)
<
Dolby Digital
<
MPEG multi channel
<
DTS multi channel
Use this setting if you have a receiver/decoder that supports Dolby Digital.
HDMI The primary audio connection is the HDMI link.
Select this item if you are using an HDMI connection between your DV137 and
your receiver or display device. The audio type will be changed automatically to
work with the device attached to your player.
Do not select this item if your HDMI display device cannot decode audio
or if you are connecting to a DVI device (since a DVI link cannot carry
audio) – choose one of the other settings instead.
DVD sample rate
This needs to be set correctly if you are using an external audio decoder, receiver or D-A converter
connected to the S/PDIF digital audio output.
Max 96K Choose this option if your external audio decoder is able to process digital audio
with a sample rate of up to 96kHz, or if you are not using the digital audio
outputs. This is the maximum sample rate present on DVD-video discs.
Max 48K Choose this option if your external audio decoder is unable to process digital
audio with a sample rate of up to 96kHz. This is the normal setting for this
menu item.
Note that this setting is relevant only to the output from DVD-video discs.
Audio compression
Allows compression of the audio stream to be turned on or off, where ‘On’ is intended for ‘late night’
listening when large volume changes are not desirable.
Turning compression on decreases the volume of the louder passages, i.e., the total dynamic range of
the audio is reduced. Normally, however, this item is set to ‘Off’, to disable compression.
This menu option affects both the analogue and the HDMI outputs (although note that the HDMI output
is affected only when multi-channel uncompressed audio is requested by the receiver, not otherwise).
The co-axial and optical digital audio outputs are never affected by this menu setting.
Compression is available only on Dolby Digital recordings.
VCD mode
Some VCD discs are produced with a dual-mono soundtrack. This means that the left audio channel
carries one language, the right another. In this case it can be useful to listen to just one of the channels.
Stereo Choose this option to play the VCD with both channels audible.
Left
channel only
Choose this option to play the VCD with only the left channel audible. The audio
from the left channel will be routed to both the left and right speakers.
Right
channel only
Choose this option to play the VCD with only the right channel audible. The audio
from the right channel will be routed to both the left and right speakers.
This setting applies only to VCD discs.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Arcam diva dv137 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Arcam diva dv137 in the language / languages: English as an attachment in your email.

The manual is 1,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info