138742
15
Zoom out
Zoom in
Previous page
1/26
Next page
Engli sh
DV137
E-15
HDMI colour space
This setting controls the type of video (the colour space) given out over the HDMI connection.
Auto The colour space will be set appropriately for the connected display.
This is the recommended setting if you are connecting the DV137 to an
HDMI- or DVI-compliant device.
YUV The HDMI connection carries Y, Pb, Pr (YUV) component video.
RGB (video) The HDMI connection carries RGB video with standard video levels.
RGB (PC) The HDMI connection carries RGB video with PC (0–255) video levels.
This setting can be changed only if ‘Main video output’ is set to ‘HDMI’. This setting has no effect on the
analogue video outputs.
Analogue resolution
Allows selection of interlaced or de-interlaced (progressive scan) output from the component
video connection.
SD-interlaced The video output will always be interlaced (standard denition video). Use this
setting if your display device does not support progressive scan.
SD
Progressive
The component- and HDMI-video outputs will put progressive scan video out for
both PAL and NTSC discs. Use this setting only if your display device supports
progressive scan in both PAL and NTSC formats.
This setting can be changed only if ‘Main video output’ is set to ‘Analogue’.
Note that the video on the component video connections always matches that on the HDMI link,
so changing this value when in ‘Analogue’ mode will change the HDMI output too.
The S-video output will be muted when progressive scan is active.
Analogue NTSC black (Pedestal)
This setting controls the ‘pedestal’ signal or black level when the NTSC video standard is used.
0 IRE This removes the pedestal from NTSC video. This setting should be used in Japan,
and also if you are using RGB video, whatever the country.
7.5 IRE This is the standard pedestal level that should be used in all countries that use
NTSC video, with the exception of Japan.
This setting can be changed only if ‘Main video output’ is set to ‘Analogue’. Note that this setting
has no effect on PAL, progressive scan or HDMI outputs.
Not all displays support
progressive scan. If you
enable progressive scan
accidentally and your
display does not support
it, you may be unable
to view the picture from
the DVD player, including
the on-screen display
required to change the
video settings back.
If this happens, use a
composite or SCART video
connection (which always
carry interlaced video)
between the DV137 and
your display device in
order to be able to see
the set-up menu and
correct the mistake.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Arcam diva dv137 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Arcam diva dv137 in the language / languages: English as an attachment in your email.

The manual is 1,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info