Manual Arcam DiVA A80 (page 9 of 15) (English, German, Dutch, French)

578757

Zoom out

Zoom in

1/15

A80/P80

English

A80/P80

Using the remote control

CR-389 Remote Control

The CR-389 remote control gives access to all functions

available on the front panel of the A80. It also has controls to

operate Arcam CD players, AM/FM tuners and DAB tuners.

The remote control transmits Philips RC-5 type codes.

Source selection buttons

These operate in the same way as the source selectors

on the front panel of your integrated amplier.

Volume and (mute)

Press + to increase volume or – to decrease the output volume

of the amplier.

Press to mute the speaker connections and preamp outputs.

Both tape outputs and the headphone socket remain active.

Mute is disabled either by pressing again, or by adjusting the

volume.

You can use the remote’s volume control in conjunction with the

SELECT button to adjust balance, tone and amplier settings.

TUNER

These buttons are used to control tuner functions.

Note that the FM/DAB lights indicate into which mode

you are switching the remote control. The lights only

illuminate for ve seconds to conserve battery power.

If neither light is illuminated this does not mean that the

remote control is not working!

NOTE: Remember to install the two supplied AAA batteries

before trying to use your remote control!

Do not place anything in front of the IR receiver on the left

of the A80, or the remote control may not work.

CD controls

These offer basic controls of Arcam CD players

SP1 and SP2

These buttons allow you to select and deselect the main (SP1)

and secondary (SP2) sets of speakers attached to your amplier

(see page 6).

Power/Standby

Toggles the amplier between standby mode and full power

mode. The power indicator light next to the power button on

the front panel is red if the amplier is in standby, amber while

the amplier is powering up (this only takes a few seconds) and

green when the amplier is powered up.

FM DAB

PROG INFO

RPT

MODE BAND

1-9

2-10 3-11

DAB

SELECT

TUNER

CR-389

AMPLIFIER

VCR DVDTAPEAV

TUNER CDAUXPHONO

ENTER

SP1

SP2 DISP

MENU DISP

4-12

5-13

6-14 7-15 8-16

DISP (display)

Cycles through the settings ‘Bright’, ‘Off’ and ‘Dim’. Turning the

display ‘Off’ generally gives a slight improvement in sound quality.

SELECT

Performs same function as the SELECT button on the front

panel. It allows you to use the remote’s volume switch in the

same way you use the control dial on the front panel – to

adjust various amplier settings (see page 8).

Note that pressing + corresponds to turning the

Control knob clockwise, – to anticlockwise.

ENTER

Performs the same function as the ENTER

button on the front panel (see page 8).

(UP and DOWN)

These buttons do not apply to the A80.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Arcam DiVA A80 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Arcam DiVA A80 Manual

Product: