578757

Arcam DiVA A80 Manual

7
Zoom out
Zoom in
Previous page
1/15
Next page
A80/P80
6
English
A80/P80
7
Recording
With the Arcam A80 it is possible to listen to and record from
one source, or to listen to one source while recording another.
Both sets of tape sockets are identical in sensitivity and suitable
for use with almost any type of recorder (cassette, CDR, MD,
VCR, reel-to-reel, etc.). The record signal is sent to both the
TAPE and VCR output sockets.
RECORD
To record the currently selected source, press RECORD until
the display shows ‘REC SOURCE’. After a few seconds the
display reverts to showing the volume level and you are ready
to record.
To listen to one source while recording another, press RECORD
again until the display shows ‘RECORD’ followed by the name
of an input (e.g. ‘AUX’, ‘CD’, ‘TUNER’, etc.). Now press the
source selector button on the front panel for the source you
wish to record. Your selection is shown on the display for a few
seconds, after which it reverts to showing the volume level and
you are ready to record.
The RECORD button can also be used as a second zone
selector, sending a source signal at line level to a second
amplier operating in another room. If you need help with this,
contact your Arcam dealer or Arcam customer support.
Tape-to-tape copying (dubbing)
You can perform tape dubbing from VCR to TAPE, but not from
TAPE to VCR.
For example, to copy from a cassette recorder connected to
the VCR socket to a cassette recorder connected to the TAPE 1
socket, rst use the RECORD button as explained above and
select ‘RECORD VCR’. This routes the VCR signal to the TAPE
output.
Set the cassette recorder connected to the TAPE socket into its
record mode and the other to playback mode to start dubbing.
TAPE
5
To play back the recording from a cassette deck attached to
the TAPE 1 input, press TAPE. ‘TAPE 1’ is shown on the display.
Selecting this input overrides the other source selectors.
It is also possible to monitor a recording while it is being made,
provided your cassette deck is a 3-head type. To do this, press
TAPE. Switching this button in/out allows an A/B comparison
between the source signal and the recorded signal.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Arcam DiVA A80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Arcam DiVA A80 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info