Manual Arcam AVR400 (page 25 of 236) (English, German, Dutch, French)

578747

Zoom out

Zoom in

1/236

E-23

English

Inserting batteries into the

remote control

The CR102 universal remote

controller

e CR102 is a sophisticated ‘universal’ backlit remote

control that can control up to eight devices. It is pre-

programmed for use with the AVR400 and many other

Arcam products (FM/DAB tuners, CD players and DVD

players).

With its extensive built-in library of codes, it can also

be used with thousands of third party audio-visual

components – TVs, satellite and set-top boxes, PVRs,

CD players, etc. See the list of codes at the back of this

handbook, beginning on page 56.

e CR102 is a ‘learning’ remote, so you can teach it

almost any function from an old single-device remote.

You can also program the CR102 to issue a sequence of

commands (‘macros’) from a single button press.

remote

control

Using the remote control

Please keep in mind the following when using the

remote control:

< Ensure there are no obstacles between the

remote control and the remote sensor on the

AVR400. e remote has a range of about 7

metres. (If the remote sensor is obscured, the Z1

IR remote control input jack on the rear panel is

available. Please consult your dealer for further

information.)

< Remote operation may become unreliable if

strong sunlight or uorescent light is shining on

the remote sensor of the AVR400.

< Replace the batteries when you notice a

reduction in the operating range of the remote

control.

Notes on batteries:

Incorrect use of batteries can result in hazards such

as leakage and bursting.

Do not mix old and new batteries together.

Do not use non-identical batteries together –

although they may look similar, dierent batteries

may have dierent voltages.

Ensure the plus (+) and minus (-) ends of each

battery match the indications in the battery

compartment.

Remove batteries from equipment that is not going

to be used for a month or more.

When disposing of used batteries, please comply

with governmental or local regulations that apply in

your country or area.

MCH

TAPE

SHIFT

iPOD

RPT

NET

RND

PHONO

AUX

DVD

SAT AV

TUN

AMP

PVR VCR

CR102

MODE

DISP

EFFECTDIRECT EQ BASS

SUBTRIM SYNC TREBLE

INFOHOMEFAVÐFAV+

SRCH

SUBTAUDIOTITLESETUP

1. Open the battery compartment by pressing the

button on the back of the handset.

2. Insert four ‘AAA’ batteries into the battery

compartment – two facing the top of the unit,

and two facing the end, as in the diagram.

3. Lower the end cap onto the plastic locating plate

in the handset. is acts as a hinge, and you

can now push the end cap rmly into its locked

position with a click.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Arcam AVR400 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 16,73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Arcam AVR400 Manual

Product: