482343

Arcam AV888 Manual

61
Zoom out
Zoom in
Previous page
1/74
Next page
E-59
English
Device codes
e tables that begin on page 64 (in the nal section of
this Handbook) list the four-gure codes for dierent
manufacturers’ devices.
Use these when setting your CR102 up to control your
devices, as described in Method 1 (see page 30).
If more than one code number is listed, try the rst
number. If the results are unsatisfactory, continue trying
the numbers for that manufacturer to get the best ‘t’
with the functionality required.
If the manufacturer of your equipment is not listed, you
can try Method 2, the Library Search (see page 30). is
allows you to scan through every set of codes contained
in the CR102’s memory.
Command summary
Direct code setup
(e.g. AV mode, NNNN=code number)
a
S
*
*
NNNN
*
*
P
Library search
(e.g. AV mode)
a
S
9
9
1
*
*
P
[
until unit turns o
S
to save
Code blink back
a
S
9
9
0
**
1
count blinks for rst N
2
count blinks for second N
3
count blinks for third N
4
count blinks for fourth N
Code learning
(e.g. AV mode fast forward key)
S
*
*
9
7
5
*
*
a
(
*
(many
rapid blinks)
(Press key on original remote that you wish to copy)
*
*
S
*
*
Delete a learned function
(e.g. AV mode fast forward key)
S
*
*
9
7
5
*
*
a
(
(
*
*
Delete all learned functions with a device
(e.g. AV mode)
S
*
*
9
7
5
a
a
Creating macros
(e.g. SRCH key)
S
*
*
9
9
5
h
a
P
w
P
z
P
S
*
*
Deassign macro
S
*
*
9
9
5
h
S
*
*
Key mover
(e.g. SAT mode, DISP key to MENU key)
z
S
*
*
9
9
4
D
U
Mode mover
(e.g. change SAT to TV(AV))
S
*
*
9
9
2
a
z
Restore device mode
(e.g. restore SAT)
S
*
*
9
9
2
z
z
Locking/unlocking a mode
(e.g. DVD mode)
d
S
*
*
9
8
2
*
*
(i.e. two blinks for lock)
d
S
*
*
9
8
2
*
*
*
*
(i.e. four blinks for unlock)
Cancel all volume punch-through
S
*
*
9
9
3
+
*
*
*
*
Restore volume punch-through
S
*
*
9
9
3
A
*
*
Mode key IR punch-through
S
*
*
9
7
1
*
*
A
Cancel mode key IR punch-through
S
*
*
9
7
1
*
*
S
*
*
NOTE
As elsewhere in this Handbook, a single ‘blink’ of
the red LED behind the power button is indicated
by the symbol
*
.
Mode key IR punch-through
e Mode key IR punch-through default is ‘on’.
Example: To set the Mode key IR punch-
through to AMP
1. Press and hold
S
until the power LED blinks twice:
*
*
.
2. Press
9
7
1
. e power LED blinks twice:
*
*
.
3. Press
A
to punch through IR from it.
Now, whenever you press and release a Mode key, the
IR data assigned to
AMP is transmitted, no matter what
the current mode is (i.e. it ‘punches through’ any other
device).
To cancel Mode key IR punch-through
1. Press and hold
S
until the power LED blinks twice:
*
*
.
2. Press
9
7
1
. e power LED blinks twice:
*
*
.
3. Press
S
until the power LED blinks twice:
*
*
.
Resetting the CR102
Resetting the CR102 will erase all learned functions
across all modes, as well as some other programmed
functions like Macros. It will not reset the Device Mode
keys; these will remain programmed to your choice of
component.
1. Press and hold
S
until the power LED blinks twice:
*
*
.
2. Press
9
8
0
. e power LED blinks four times:
*
*
*
*
.
3. Press and hold
S
until the power LED blinks twice:
*
*
.
4. Press
9
9
3
.
5. Press
A
. e power key LED blinks twice:
*
*
.
6. Press and hold
S
until the power LED blinks twice:
*
*
.
7. Press
9
7
1
. e power LED blinks twice:
*
*
.
8. Press
A
. e power key LED blinks twice:
*
*
.
… 61 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Arcam AV888 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Arcam AV888 in the language / languages: English as an attachment in your email.

The manual is 2,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Arcam AV888

Arcam AV888 User Manual - German, Dutch - 200 pages

Arcam AV888 User Manual - Dutch - 72 pages

Arcam AV888 User Manual - French - 200 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info