Manual Arcam AV888 (page 59 of 74) (English)

482343

Zoom out

Zoom in

1/74

E-57

English

Example: To deassign the Macro associated

with the

key

1. Press and hold

until the power LED blinks twice:

2. Press

3. Press

4. Press and hold

until the power LED blinks twice:

Volume punch-through

Volume punch-through means that, no matter which

Device Mode is selected, the CR102 controls the

AVR500, AVR600 or AV888 volume. You don’t need to

press

on your CR102; this feature is switched on by

default.

ere are times, however, when you might want to

control a device’s volume directly when in a specic

Device Mode.

Example: To cancel volume punch-through

for a TV (AV mode)

1. Press

once.

2. Press and hold

until the power LED blinks twice:

3. Press

4. Press

. e power LED blinks four times.

Now, while in TV (AV) mode, you will be able to control

the volume or mute functions of your TV directly.

To completely cancel all volume punch-

through settings

1. Press and hold

until the power LED blinks twice:

2. Press

3. Press

. e power LED blinks four times

Now, whichever mode you’re in, you will have direct

access to that device’s volume or mute functions,

assuming they are available. You would need to switch to

AMP mode to alter the AVR500/AVR600/AV888 volume.

Example: To restore default volume punch-

through settings to all Device Modes

1. Press and hold

until the power LED blinks twice:

* *

2. Press

9 9 3

3. Press

. e power key LED blinks twice:

Key Mover

Sometimes you might nd that a key you use a lot for

your system is in the ‘wrong’ place on the CR102 keypad

for your comfort. It’s quite easy to reassign a favourite

function to a more accessible key. It is even possible

to move a function from one Device Mode to another

Device Mode.

Example: To assign the

function to the

key in SAT mode

1. Press

2. Press and hold

until the power LED blinks twice:

3. Press

4. Press the key you want to move (e.g.

)

5. Press the key you want to move the key to (e.g.

Now, pressing either

while in SAT Device

Mode makes the CR102 transmit the

function.

To completely swap over the functionality of the two

keys to put the

functionality on the

key, repeat

the above process again, but swap over the

and

key presses in the example.

Note that the function that is copied over to the new key

is always the original function of the old key.

Restore a moved key

To restore a key to its previous function, repeat the

example above, pressing the key to be restored twice

(copy it back to itself).

Restore all moved keys for a Device Mode

To restore all keys in a Device Mode to their original

functional positions, repeat the example above, but press

the relevant Device Mode key (e.g.

) at points 1,4 and

5 in the example.

Creating Macros

You can program your CR102 to issue a sequence of

commands when you press a single key. Any sequence of

commands you regularly use can be reduced to a single

key press for your convenience.

For example, you might want to turn o your TV, VCR

and Satellite at the same time.

A key programmed with a Macro is available in all

modes; it will replace that key’s dierent functions

for all modes.

A Macro can consist of up to eight key presses.

Example: To assign a Macro to the

key

1. Press and hold

until the power LED blinks twice:

2. Press

9 9 5

3. Press

(the Macro will be assigned to this key).

4. Press a,

. (ese are the Macro

steps you wish to record.)

5. To store the Macro, press and hold

until the

power LED blinks twice:

Now, whenever you press

, the CR102 will toggle the

power to your TV, VCR and Satellite.

e important word here is ‘toggle’. For example, if

the TV and Satellite devices are currently on, but

the VCR is o, pressing

will switch o the TV

and Satellite and switch on the VCR (rather than

switching all three devices on or o).

When using Macros, remember that you may need

to change mode or use

, and that each key press

(including changing modes and pressing

) counts

as one of the Macro steps. You cannot use a Macro

key within another Macro.

If the amount of memory storage for a particular

Macro is exceeded, the power LED comes on for ve

seconds. You can, however, save the macro steps up

to that point by pressing

, or you can cancel the

Macro recording by pressing any other key.

e delay between key presses is recorded as part of

the Macro. A delay of up to 30 seconds is permitted.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Arcam AV888 in the language / languages: English as an attachment in your email.

The manual is 2,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Arcam AV888

Arcam AV888 User Manual - German, Dutch - 200 pages

Arcam AV888 User Manual - Dutch - 72 pages

Arcam AV888 User Manual - French - 200 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Arcam AV888 Manual

Product: