294082
47
Zoom out
Zoom in
Previous page
1/135
Next page
39NetBotz Appliance User’s Guide
Image Quality The amount of compression applied to captured images. As
compression increases, file sizes decrease but the quality of the
image decreases as well. For Pelco cameras, this field does not
apply. Default is shown in this field and it cannot be changed.
Note: The image quality and the mode setting specified in the
Camera view affect the maximum frame rate available. Choosing a
low image quality and a small image size (mode), for example, will
result in a higher available maximum frame rate.
For more information, see “Standard camera controls” on page 23.
For more information on the Mode setting in the Camera view, see
“Viewing Live Video” on page 22.
Post-Alert Capture Time The total number of seconds after the alert generating event that
images are included in alert notifications.
N
OTE: For Pelco cameras, once an alert is generated a new alert
will not be generated until 30 seconds has elapsed. To ensure that
you capture all motion, set this field to 30 seconds.
The number of post-alert images captured is equal to the Post-Alert
Capture Time multiplied by the Maximum Rate. If the total number
of post-alert image captures and pre-alert image captures is larger
than the Maximum Camera Pictures setting for an alert action, the
most recent images captured are given preference and included in
the alert notification.
For more information, see “Creating a send e-mail alert action” on
page 108.
Pre-Alert Capture Time The total number of seconds prior to the event that generated the
alert that images are included in the alert notification. The number
of pre-alert images that are captured is equal to the Pre-Alert
Capture Time multiplied by the Maximum Rate.
If the total number of post-alert image captures and pre-alert image
captures is larger than the Maximum Camera Pictures setting for an
alert action, the most recent images captured are given preference
and included in the alert notification.
For more information, see “Creating a send e-mail alert action” on
page 108.
Delay Time Before Capturing The number of seconds between when an alert is generated and the
first picture capture.
Include Audio Specify whether the camera pod should capture audio and include it
with the alert.
N
OTE: This option is available only when configuring Capture
settings for camera pods and CCTV Adapter Pods connected to a
NetBotz 550, NetBotz 570 or an appliance with the Advanced
Software Pack.
Audio Volume The volume at which audio is captured.
Field Description
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Apc nbwl0455 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Apc nbwl0455 in the language / languages: English as an attachment in your email.

The manual is 1,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info